PREDICTING MINIMUM TEMPERATURE, ESPECIALLY AS A FUNCTION OF PRECEDING TEMPERATURE
نویسندگان
چکیده
منابع مشابه
Corrosion Behaviour of Nickel Coated AISI 316 Stainless Steel as a Function of Annealing Temperature
AISI 316 stainless steels were coated with 250 nm Ni film by electron beam deposition and post-annealed at different temperatures with a nitrogen flow of 600 cm3min-1 nitrogen. The prepared samples were corrosion tested in 1.0 M sulphuric acid solution using potentiodynamic technique. Crystallographic and morphological structure of the samples were analyzedanalysed by X-ray diffraction (XRD) an...
متن کاملRheological and Physicochemical Properties of Honeys as a Function of Temperature, Concentration and Moisture Content
In this study the rheological and physicochemical properties of four types of honeys, two poly floral (Mountain, Forest) and two mono floral (Sunflower, Ivy), were investigated. Rheological characteristics of honeys were evaluated at different temperatures (10, 15, 20, 25 and 30ºC). All the honeys exhibited Newtonian behavior for shear rate in the range of 1.045-41.8 s-1. The viscosity of sampl...
متن کاملOPTICAL PROPERTIES OF THIN Cu FILMS AS A FUNCTION OF SUBSTRATE TEMPERATURE
Copper films (250 nm) deposited on glass substrates, at different substrate temperatures. Their optical properties were measured by ellipsometery (single wavelength of 589.3 nm) and spectrophotometery in the spectral range of 200–2600 nm. Kramers Kronig method was used for the analysis of the reflectivity curves of Cu films to obtain the optical constants of the films, while ellipsometery measu...
متن کاملAcetic acid Separation as a Function of Temperature Using Commercial Pervaporation Membrane
Acetic acid was separated from a dilute mixture using a commercial polyvinyl alcohol (PVA) membrane. Intrinsic separation characteristics of the membrane were studied as a function of temperature. The degree of membrane swelling decreased marginally with increase in feed temperature. At 25oC the maximum degree of swelling was found out to be 46.3%, which reduced to 39.5%...
متن کاملPoint of Minimum Temperature
A homogeneous convex centrosymmetric body with constant thermal properties is initially at temperature zero and its boundary is maintained at a temperature Tb > 0. Prove or disprove that at any time t > 0, the point of minimum temperature is the center. Also, prove or disprove that the isothermal surfaces are convex and centrosymmetric. Note that the convexity of the isothermal surfaces will im...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Monthly Weather Review
سال: 1930
ISSN: 0027-0644,1520-0493
DOI: 10.1175/1520-0493(1930)58<179:pmteaa>2.0.co;2