Precision Positioning Device Utilizing Combined Piezo-VCM Actuator.
نویسندگان
چکیده
منابع مشابه
One-DOF Precision Position Control using the Combined Piezo-VCM Actuator
This paper presents the control performance of a highprecision positioning device using the hybrid actuator composed of a piezoelectric (PZT) actuator and a voice-coil motor (VCM). The combined piezo-VCM actuator features two main characteristics: a large operation range due to long stroke of the VCM, and high precision and heavy load positioning ability due to PZT impact force. A one-degree-of...
متن کاملA linear actuator for precision positioning of dual objects
In this paper, a linear actuator for precision positioning of dual objects is proposed based on a double friction drive principle using a single piezoelectric element (PZT). The linear actuator consists of an electromagnet and a permanent magnet, which are connected by the PZT. The electromagnet serves as an object 1, and another object (object 2) is attached on the permanent magnet by the magn...
متن کاملForce Stepping Piezo Actuator: a Motorised Solution for High Resolution Positioning and External Forces Resistance
Typical holding force of piezo motors is defined by friction force, required to make motor move. However, increase of friction force is not inconsequent for motor performances in terms of speed, max motion force and lifetime (tribology). In this paper, a new motor, offering high resolution positioning and holding position when unpowered, is presented. Based on a Stepping Piezo Actuator [1] at i...
متن کاملSingle Piezo-Actuator Rotary-Hammering (SPaRH) Drill
The search for present or past life in the Universe is one of the most important objectives of NASA’s exploration missions. Drills for subsurface sampling of rocks, ice and permafrost are an essential tool for astrobiology studies on other planets. Increasingly, it is recognized that drilling via a combination of rotation and hammering offers an efficient and effective rapid penetration mechani...
متن کاملMicro Fluid device Using Thick Layer Piezo Actuator Prepared on Si Micro-machined Structure
The design and fabrication of a piezoelectric micro actuator on a silicon diaphragm is presented for application of micro ink jet. We developed the micro devices for the fluid transference that are fabricated using thick film technologies for ceramic materials and Si micro-machining. The performance of drop ejection was shown from the optimal design parameters. It is closely related to the prec...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Precision Engineering
سال: 2001
ISSN: 1882-675X,0912-0289
DOI: 10.2493/jjspe.67.70