Precipitation of an Intermetallic Phase in Mo-alloyed Tungsten Heavy Alloys
نویسندگان
چکیده
منابع مشابه
Optimizaton of Mo-Si-B Intermetallic Alloys
Mo-Si-B intermetallics consisting of the phases Mo3Si and Mo5SiB2, and a molybdenum solid solution (“ -Mo”), have melting points on the order of 2000 °C. These alloys have potential as oxidationresistant ultra-high-temperature structural materials. They can be designed with microstructures containing either individual -Mo particles or a continuous -Mo phase. A compilation of existing data shows...
متن کاملFinite Element Simulation of Liquid Phase Sintering with Tungsten Heavy Alloys
Densification and distortion of W-Ni-Fe tungsten heavy alloys during liquid phase sintering are modeled using constitutive laws of grain growth, densification, and deformation. The models are ‘‘calibrated’’ via carefully designed experiments to obtain the necessary parameters to enable modeling. Metallographic analysis of quenched samples is used to obtain grain size data as functions of time a...
متن کاملPrecipitates and intermetallic phases in precipitation hardening Al–Cu–Mg–(Li) based alloys
The present study contains a critical review of work on the formation of precipitates and intermetallic phases in dilute precipitation hardening Al–Cu–Mg based alloys with and without Li additions. Although many suggestions for the existence of pre-precipitates in Al–Cu–Mg alloys with a Cu/Mg atomic ratio close to 1 have been made, a critical review reveals that evidence exists for only two tru...
متن کاملApplication of Feal Intermetallic Phase Matrix Based Alloys in the Turbine Components of a Turbocharger
J. Cebulski, Silesian University of Technology, Institute of Material Science, Katowice, Poland This paper presents a possible application of the state-of-the-art alloys based on the FeAl intermetallic phases as materials for the manufacture of heat-proof turbine components in an automobile turbocharger. The research was aimed at determining the resistance to corrosion of Fe40Al5CrTiB alloy in ...
متن کاملMagnetization curves of sintered heavy tungsten alloys for applications in MRI-guided radiotherapy.
PURPOSE Due to the current interest in MRI-guided radiotherapy, the magnetic properties of the materials commonly used in radiotherapy are becoming increasingly important. In this paper, measurement results for the magnetization (BH) curves of a range of sintered heavy tungsten alloys used in radiation shielding and collimation are presented. METHODS Sintered heavy tungsten alloys typically c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATERIALS TRANSACTIONS
سال: 2003
ISSN: 1345-9678,1347-5320
DOI: 10.2320/matertrans.44.358