Precipitation Hardening of 18%, 20%, and 25%Nickel Maraging Steels

High-Alloy Ferritic Steels: Martensitic Stainless Steels, Precipitation Hardening (code 1810)

This report may be updated and revised periodically in response to the needs of the technical community; up-to-date versions can be requested from the editors at the address given below or downloaded at http://www.ca.sandia.gov/matlsTechRef/. The content of this report will also be incorporated into a Sandia National Laboratory report (SAND2008-1163); the most recent version can be obtained fro...

Magnetic Micro-probe Determination of the Condition of Maraging Steel

Microstructural and mechanical properties of precipitation-hardened maraging steel could be stated on a basis of magnetic properties of such a material. A correlation between mechanical and magnetic properties of the maraging steel is treated from the view of non-destructive testing during and after heat treatment as well as during use under unfavourable conditions at elevated operating tempera...

Duplex Hardening of Steels for Aeroengine Bearings

Duplex hardening is a process in which conventional heat-treatments such as secondary or case hardening are followed up by surface nitriding to achieve exceptional properties, particularly in the context of aeroengine bearings. Hardness values in excess of 1 000 HV can in principle be achieved, and although the hardness decreases as a function of depth below the surface, some level of enhanceme...

Precipitation Hardening of Metal Alloys

Precipitation hardening, or age hardening, provides one of the most widely used mechanisms for the strengthening of metal alloys. The fundamental understanding and basis for this technique was established in early work at the U. S. Bureau of Standards on an alloy known as Duralumin [1,2]. Duralumin is an aluminum alloy containing copper and magnesium with small amounts of iron and silicon. In a...

Secondary Hardening in High Speed Steels