Precipitates in Wrought Ni-Fe Base Superalloy 706
نویسندگان
چکیده
منابع مشابه
Hot Ductility Loss in a Fe-Ni-Based Superalloy
High temperature tensile tests have been conducted on samples of a Fe-Ni based superalloy, Incoloy A-286, and significant ductility loss has been observed at 1220 °C. Titanium-rich, thin-film-like phase has been found on the inter-granular facets of fracture surfaces. It appears that sulfur content of Ti-rich phase was higher than that of the matrix. At 1220 °C, liquation of Ti-rich phases has ...
متن کاملCreep Crack Growth Simulation of Ni-base Superalloy
The purpose of this study is to develop a numerical approach to simulate the creep cracking of a Ni-base superalloy. The approach is based in continuum damage mechanics (CDM) and uses the classic Kachanov-Rabotnov constitutive equations for creep deformation and damage evolution. Creep damage takes the form of defects such as microcracks, cavities, voids, etc. A numerical crack growth algorithm...
متن کاملThermomechanical Fatigue Behavior of a Directionally Solidified Ni-Base Superalloy
A continuum crystal plasticity model is used to simulate the material behavior of a directionally solidified Ni-base superalloy, DS GTD-111, in the longitudinal and transverse orientations. Isothermal uniaxial fatigue tests with hold times and creep tests are conducted at temperatures ranging from room temperature (RT) to 1038°C to characterize the deformation response. The constitutive model i...
متن کاملFatigue-creep-environment Interactions in a Directionally-solidified Ni-base Superalloy
Directionally-solidified (DS) GTD-111 is a Ni-base superalloy designed to withstand damage occurring in the first and second stage blades of gas-powered turbines. Because of the distinctive microstructure of this material, the manner in which fatiguecreep-environment damage mechanisms interact to initiate cracks is sensitive to grain structure and chemical composition. Along with fatigue cyclin...
متن کاملCarbides Evolution in a Ni-16Mo-7Cr Base Superalloy during Long-Term Thermal Exposure
The effect of long-term thermal exposure on the carbide evolution in a Ni-16Mo-7Cr base superalloy was investigated. The results show that M12C carbides are mainly precipitated on the grain boundaries during thermal exposure, and the primary massive M₆C carbides can be completely transformed to M12C carbides in situ at temperatures above 750 °C for long-term thermal exposure. The transformation...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1996
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.60.9_802