Precipitates in Compact Strip Production (CSP) Process Non-Oriented Electrical Steel
نویسندگان
چکیده
منابع مشابه
The Effect of Cold Rolling Process on the Microstructure and Texture Evolution in a 1 wt. % Si Non-oriented Electrical Steel
In this study, the effect of cold rolling process on the microstructure and texture evolution in 1wt. % Si non-oriented electrical steel was investigated. For this purpose, all samples were processed through single-stage hot rolling at 1100 ° C and two-stage cold rolling (cross rolling and unidirectional rolling) with intermediate annealing at 650 °C for 35 seconds. Finally, all of them were fu...
متن کاملAnalysis of Microstructure and Microtexture in Grain-oriented Electrical Steel (goes) during Manufacturing Process
A. Volodarskaja, V. Vodárek, J. Holešinský, VŠB Technical University of Ostrava, FMME, Ostrava, Czech Republic. Š. Miklušová, O. Žáček. ArcelorMittal Frýdek-Místek, Frýdek-Místek, Czech Republic The final Goss texture in grain-oriented electrical steels (GOES) is affected by microstructure evolution and inheritance during the whole production process. This paper presents the results of detailed...
متن کاملCorrelation of Titanium Content and Core Loss in Non-oriented Electrical Steel Sheets
The core loss of electrical steel is defined as the dissipation of electrical energy in the form of heat during magnetization by an alternating current. Many efforts have been made to reduce the core loss. Numerous parameters, including the chemical composition and the metallurgical technology, influence the properties of the steel. Electrical steel sheets are mainly produced from Fe-Si-C alloy...
متن کاملthe effect of cold rolling process on the microstructure and texture evolution in a 1 wt. % si non-oriented electrical steel
in this study, the effect of cold rolling process on the microstructure and texture evolution in 1wt. % si non-orientedelectrical steel was investigated. for this purpose, all samples were processed through single-stage hot rolling at1100 ° c and two-stage cold rolling (cross rolling and unidirectional rolling) with intermediate annealing at 650 °cfor 35 seconds. finally, all of them were fully...
متن کاملSecondary recrystallization characteristics of 3%Si grain-oriented electrical steel
A secondary recrystallization Lab study focusing on the secondary recrystallization temperature and magnetic properties was carried out on cold rolling industrial samples of 3%Si grain-oriented electrical steel produced by low slab reheating temperature technology. The results showed a secondary recrystallization temperature, determined by the observed grain size change, of 1080 C with annealin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metals
سال: 2020
ISSN: 2075-4701
DOI: 10.3390/met10101301