Precipitate Flotation of Aluminum and Copper

Vitrification of copper flotation waste.

The vitrification of an hazardous iron-rich waste (W), arising from slag flotation of copper production, was studied. Two glasses, containing 30wt% W were melted for 30min at 1400 degrees C. The first batch, labeled WSZ, was obtained by mixing W, blast furnace slag (S) and zeolite tuff (Z), whereas the second, labeled WG, was prepared by mixing W, glass cullet (G), sand and limestone. The glass...

Recovery of Copper from Copper Slag and Copper Slag Flotation Tailings by Oxidative Leaching

Copper smelter slag and copper smelter slag flotation tailings were leached using sulphuric acid solutions, without or with the addition of either ferric sulphate or hydrogen peroxide. Copper extraction from the slag was typically found to be twice as high as that from the slag flotation tailings. Hydrogen peroxide was determined to be the best lixiviant. Thus, copper and iron extractions were ...

Multichannel reflectance spectral assaying of zinc and copper flotation slurries

Copper recovery from thickener overflow by electrocoagulation/flotation: optimization of response surface, modeling, and sludge study

The electrocoagulation/flotation process is a novel approach in mining industry that is implemented to return Cu metal to the production cycle, which improves copper recovery and reduces waste water. In this research work, the response surface methodology was applied to optimize the factors effective in Cu metal recovery and sludge volume produced from thickener overflow. To this end, the D-opt...

Comparison between Helical and Elliptical Static Mixers Performance in Column Flotation of Sungun Copper Plant

The flotation circuit in Sungun copper plant consists of two column flotation cells as cleaner, having fixed-spargers system. To achieve the expected aims in flotation step, there are serious operational challenges such as: fast choking of the static mixers, boiling problem, burping phenomena and pulp overflow to concentrate lander, maintenance and control problems. An attempt was exerted by im...