Precipitate Dissolution and Grain Growth in the Heat Affected Zone of HSLA-100 Steel

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Heat Affected Zone in Surfacing Chromium Ledeburitic Steel

Repair welding is not used enough in the industry 1 . One of the reasons for this lies in the insufficient and unrealiable knowledge in many segments of this area. A very important part is having appropriate knowledge of metallurgical processes in heating of the base material 2-4 . Unsuitable heating deteriorates the microstructure as it reduces toughness and fracture behaviour of the weld 5 . ...

متن کامل

Heat affected zone microstructures and their influence on toughness in two microalloyed HSLA steels

Microstructures and Charpy impact properties have been examined in two microalloyed steels following heat treatments to simulate weld heat affected zone (HAZ) structures over a range of heat input conditions, characterised by the cooling time from 800 to 500 !C (Dt8/5). The base materials were low carbon structural steel plates microalloyed with vanadium and nitrogen (V–N) and niobium (Nb), res...

متن کامل

Investigation of the effect of heat input on the properties of HSLA 100 steel weld joints produced by SMAW process

The microstructure and mechanical properties of HSLA-100 steel weld joints was investigated. Welding with three heat input of 0.820, 1.176 and 1.392 kJ / mm was performed using E12018 electrode. Microstructural studies were performed using scanning electron and optical microscopes. The mechanical properties of welded joints were evaluated by impact and microhardness tests. Microstructural studi...

متن کامل

Investigation of the effect of heat input on the properties of HSLA 100 steel weld joints produced by SMAW process

The microstructure and mechanical properties of HSLA-100 steel weld joints was investigated. Welding with three heat input of 0.820, 1.176 and 1.392 kJ / mm was performed using E12018 electrode. Microstructural studies were performed using scanning electron and optical microscopes. The mechanical properties of welded joints were evaluated by impact and microhardness tests. Microstructural studi...

متن کامل

The Effect of Precipitate Evolution on Austenite Grain Growth in RAFM Steel

To study the effects of various types of precipitates and precipitate evolution behavior on austenite (size and phase fraction) in reduced activation ferritic/martensitic (RAFM) steel, RAFM steel was heated to various austenitizing temperatures. The microstructures of specimens were observed using optical microscopy (OM) and transmission electron microscopy (TEM). The results indicate that the ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: ISIJ International

سال: 2003

ISSN: 0915-1559

DOI: 10.2355/isijinternational.43.1431