Pre-Treatment Methods for Regeneration of Spent Activated Carbon
نویسندگان
چکیده
منابع مشابه
Optimization of chemical regeneration procedures of spent activated carbon
The chemical regeneration of granular activated carbon exhausted in a petrochemical wastewater unit was investigated. Gas chromatography and energy-dispersive X-ray spectroscopy demonstrated that spent activated carbon carries large types of organic and inorganic materials. Diverse chemical solvents were adopted in comparison with traditional chemical solvents and regeneration efficiency was in...
متن کاملElectrodialysis with bipolar membrane for regeneration of a spent activated carbon.
The main purpose of the present work was to develop a treatment method to regenerate granular adsorbent beds saturated with H(2)S by utilizing three electrodialysis compartments equipped with a cation or an anion exchange membrane or a bipolar membrane. Three electrodialysis compartments were utilized under various experimental parameters to determine the optimum conditions for the recovery of ...
متن کاملRegeneration and treatment of sulfidic spent caustic using analytic hierarchy process
Background: Sulfur compounds must be removed from petroleum because they contribute to environmental pollution. A strong alkaline solution such as caustic soda is used to remove these compounds. This spent caustic has high values for chemical oxygen demand (COD) concentration, pH and total sulfur. In this study, the regeneration and treatment methodology of sulfidic spent caustic was inve...
متن کاملRecovery of Palladium from Spent Activated Carbon-Supported Palladium Catalysts
TÜBİTAK Marmara Research Center, Chemistry Institute, 41470 Gebze, Kocaeli, Turkey Email: [email protected] Activated carbon-supported palladium catalysts are liable to progressive deactivation even in the absence of any gaseous contaminants during the oxidation of hydrogen under ambient conditions. The high value of palladium coupled with environmental considerations means that n...
متن کاملA Procedure for Preparation of Semi-activated Carbon Fiber without any Treatment under High Temperature
A procedure for preparation of semi-activated carbon fiber (SACF) without any treatment under high temperature was proposed. The first step of the procedure is coating of an inorganic fiber (E-glass fiber) by an adsorbent mixture including powder activated carbon, methyl cellulose and water. In this work a set of experiments was performed to attain appropriate adsorbent mixture for good quality...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Molecules
سال: 2020
ISSN: 1420-3049
DOI: 10.3390/molecules25194561