Pre-design guidelines for GFRP composite sandwich panels

Structural behaviour of composite sandwich panels

Uncertainties in structural dynamics for composite sandwich panels

This paper concerns uncertainties in structural dynamics for composite sandwich panels constituted of two thin carbon-resin skins and one high stiffness closed-cell foam core. Each skin is constituted of two unidirectional plies [60/-60]. Such light composite sandwich panels, manufactured with a same process, generally present a significant dispersion for their Frequency Response Functions (FRF...

Design of metallic textile core sandwich panels

Metallic sandwich panels with textile cores have been analyzed subject to combined bending and shear and then designed for minimum weight. Basic results for the weight benefits relative to solid plates are presented, with emphasis on restricted optimizations that assure robustness (non-catastrophic failure) and acceptable thinness. Select numerical simulations are used to check the analytical r...

Design of Sandwich Panels With Prismatic Cores

The paper focuses on optimization of lightweight sandwich panels with prismatic cores subject to bending loads in the two principal in-plane directions. Comparisons are made with optimal designs of panels with corrugated cores: a limiting case. When optimized for loading transverse to the prism axis, prismatic panels outperform those with corrugated cores, especially at lower loads. In contrast...

Two-way bending behavior of 3-D GFRP sandwich panels with through-thickness fiber insertions

This paper presents the details of a research program that was conducted to evaluate the two-way bending behavior of 3-D glass fiber reinforced polymer (GFRP) sandwich panels. The panels consist of GFRP skins with a foam core and through-thickness fiber insertions. While the behavior of these panels under one-way bending is relatively well understood the behavior under two-way bending has not y...