Practical adhesion measurements of protective coatings on bronze by three-point bending test
نویسندگان
چکیده
منابع مشابه
Flexural Properties and Fracture Behavior of Nanoporous Alumina film by Three-Point Bending Test
This study investigated the influence of porosity on the flexural property of a nanoporous alumina film. When the porosity of the alumina film increased, both bending strength and modulus declined. The results from the bending test revealed that the setting of the film during the bending test had significant influence on the flexural property. Fracture only occurred when the porous side of the ...
متن کاملBamboo Taper Effect on Third Point Loading Bending Test
Abstract—Geometrical shape of bamboo usually assumed as tapered hollow pipe. This study proved that the dimensional changes along the bamboo stem significantly affected to its Modulus of Rupture (SR) value which measured from third point loading bending test. Therefore if the bending test applied using third point loading configuration, the SR value should be adjusted by strength ratio of taper...
متن کاملProtective coatings on extensible biofibres.
Formulating effective coatings for use in nano- and biotechnology poses considerable technical challenges. If they are to provide abrasion resistance, coatings must be hard and adhere well to the underlying substrate. High hardness, however, comes at the expense of extensibility. This property trade-off makes the design of coatings for even moderately compliant substrates problematic, because s...
متن کاملMODIFICATION INFLUENCE OF MISCHMETAL ON FRACTOGRAPHY FRACTURE OF G17CrMo5-5 CAST STEEL SAMPLES AFTER THE THREE-POINT BENDING TEST
J. Kasińska, Faculty of Mechatronics and Machine Design, Kielce University of Technology, Kielce, Poland The article presents the analysis of fracture surfaces after the three-point bending test at a temperature range from + 20 °C to 80 °C. The author shows a beneficial effect of mischmetal on the cracking mechanism and on the character of fractures. It has been shown that the width of the duct...
متن کاملCrackling noise in three-point bending of heterogeneous materials.
We study the crackling noise emerging during single crack propagation in a specimen under three-point bending conditions. Computer simulations are carried out in the framework of a discrete element model where the specimen is discretized in terms of convex polygons and cohesive elements are represented by beams. Computer simulations revealed that fracture proceeds in bursts whose size and waiti...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Coatings Technology and Research
سال: 2019
ISSN: 1547-0091,1935-3804
DOI: 10.1007/s11998-019-00230-5