Power quality metrics for DC grids with pulsed power loads

application of upfc based on svpwm for power quality improvement

در سالهای اخیر،اختلالات کیفیت توان مهمترین موضوع می باشد که محققان زیادی را برای پیدا کردن راه حلی برای حل آن علاقه مند ساخته است.امروزه کیفیت توان در سیستم قدرت برای مراکز صنعتی،تجاری وکاربردهای بیمارستانی مسئله مهمی می باشد.مشکل ولتاژمثل شرایط افت ولتاژواضافه جریان ناشی از اتصال کوتاه مدار یا وقوع خطا در سیستم بیشتر مورد توجه می باشد. برای مطالعه افت ولتاژ واضافه جریان،محققان زیادی کار کرده ...

Bifurcation Analysis of a DC-DC Bidirectional Power Converter Operating with Constant Power Loads

Direct current microgrids (MGs) are an emergent option to satisfy new demands for power quality and integration of renewable resources in electrical distribution systems. This work addresses the large-signal stability analysis of a DC-DC bidirectional converter (DBC) connected to a storage device in an islanding direct current (DC) MG. This converter is responsible for controlling the balance o...

OffshoreDC DC grids for integration of large scale wind power

Modeling and Stability Analysis of AC-DC Power System with Controlled Rectifier and Constant Power Loads

-Power converters with their controls normally behave as a constant power load. This load can significantly degrade the system stability. Therefore, the system dynamic model is very importance because it can be used for stability analysis. It is well known that power converter models are time-varying because of their switching behaviours. This paper presents the DQ modeling method to eliminate ...

Power Quality Improvement by Using Multipulse AC-DC Converters for Varying Loads

Power electronic devices are non-linear loads that create harmonic distortion and can be susceptible to voltage dips if not adequately protected. The most common economically damaging power quality problem encountered involves the use of variable-speed drives. Variable-speed motor drives or inverters are highly susceptible to voltage dip disturbances and cause particular problems in industrial ...