Power Optimization by Using Reconfigurable LFSR with Gated Clock
نویسندگان
چکیده
منابع مشابه
Comparative Study of Power Optimization Using Look Ahead Clock Gating Based on Auto Gated Flipflops
Abstract:Gating of the clock signal in VLSI chips is nowadays a mainstream methodology for reducing switching power consumption.several techniques to reduce dynamic power of which clock gating is predominant.clock gating is employed at all levels:system architecture,block design,logic design and gates.three gating methods are known.the most popular is synthesis based on the logic of underlying ...
متن کاملPower Reduction in Microprocessor Chips by Gated Clock Routing
This paper presents a zero-skew gated clock routing technique for VLSI circuits. The gated clock tree has masking gates at the internal nodes of the clock tree, which are selectively turned on and off by the gate control signals during the active and idle times of the circuit modules to reduce switched capacitance of the clock tree. The clock tree topology is constructed based on the locations ...
متن کاملLow Power Clock Gated Sequential Circuit Design
Reducing Power dissipation is one of the crucial problems in today’s scenario. So this dissipation has become a bottleneck in the design of high speed synchronous systems which are operating at high frequency. Clock signals have been a great source of Power. Design can be made on the basis of Clock gating approach to reduce the consumption of clock’s signal switching power which is the foremost...
متن کاملGated-Demultiplexer Tree Buffer for Low Power Using Clock Tree Based Gated Driver
With the progress of VLSI technology, delay buffer plays an important role affecting the circuit design and performance. This paper presents the design of low power buffer using clock gating and gated driver tree. Since delay buffers are accessed sequentially, it adopts a gated clock ring counter addressing scheme. The ring counter employs double edge triggered (DET) flip flops instead of tradi...
متن کاملPower Optimization of Linear Feedback Shift Register Using Clock Gating
A modified Linear Feedback Shift Register is designed in which power consumption reduction by deactivating the clock signal to Flip Flop when the output signal is same as input signal. The power consumption of the new LFSR is reduced due to the reduced switching of Flip Flop To verify, the maximum, minimum and average
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2020
ISSN: 1757-899X
DOI: 10.1088/1757-899x/993/1/012065