Power-law creep and residual stresses in a carbopol gel
نویسندگان
چکیده
منابع مشابه
Power-law creep in near-equiatomic nickel–titanium alloys
The compressive creep behavior of nickel-rich B2–NiTi (with 50–140 lm grain size) was studied over the stress range 3–11 MPa and the temperature range 950–1100 C. The stress exponent (n = 2.7) and activation energy (Q = 155 kJ mol ) are compared with a literature review of NiTi creep studies performed over lower temperature and/or higher stresses. Possible explanations for discrepancies between...
متن کاملWelding residual stresses in ferritic power plant steels
Many of the degradation mechanisms relevant to power plant components can be exacerbated by stresses that reside within the material. Good design or structural integrity assessments require therefore, an accounting of residual stresses, which often are introduced during welding. To do this it is necessary to characterise the stresses, but this may not be possible in thick components using non-d...
متن کاملDensification of Porous Materials by Power-law Creep
-The densification of a porous intermetallic alloy (Ti-14wt%AI-21wt%Nb) during the final stage of densification has been investigated under various states of stress and compared with the predictions of current models for densification by power-law creep. The experiments generally confirm the model predictions that the densification rate is a sensitive function of the stress state. Experimentall...
متن کاملresidual stresses in thermoplastic composites: a review
applications of thermoplastic composites have developed extensively. the thermoplastic composites in comparison with the thermoset composites have many advantages. thermoplastic composites can be melted and remolded many times. the duration of manufacturing process of these composites is short, producing very tough material, and the welding ability and multiple recyclings are their further adva...
متن کاملResidual Stresses Measurement of a Quenched Cylinder using Slitting Method
Residual Stress measurement has gained interests among researchers for many years due to its great influence on the structural integrity. Slitting method is one of the destructive techniques that relies on the introduction of an increasing cut to a part containing residual stresses. Similar to all other mechanical strain relief techniques, slitting also suffers from its shortcomings during the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Rheologica Acta
سال: 2016
ISSN: 0035-4511,1435-1528
DOI: 10.1007/s00397-016-0961-4