Power-efficient III-V/Silicon external cavity DBR lasers
نویسندگان
چکیده
منابع مشابه
Vertical-external-cavity semiconductor lasers
Surface-emitting semiconductor lasers can make use of external cavities and optical pumping techniques to achieve a combination of high continuous-wave output power and near-diffraction-limited beam quality that is not matched by any other type of semiconductor source. The ready access to the laser mode that the external cavity provides has been exploited for applications such as intra-cavity f...
متن کاملIntra-cavity cryogenic optical refrigeration using high power vertical external-cavity surface-emitting lasers (VECSELs).
A 7% Yb:YLF crystal is laser cooled to 131 ± 1 K from room temperature by placing it inside the external cavity of a high power InGaAs/GaAs VECSEL operating at 1020 nm with 0.15 nm linewidth. This is the lowest temperature achieved in the intracavity geometry to date and presents major progress towards realizing an all-solid-state compact optical cryocooler.
متن کامل16 W output power by high-efficient spectral beam combining of DBR-tapered diode lasers.
Up to 16 W output power has been obtained using spectral beam combining of two 1063 nm DBR-tapered diode lasers. Using a reflecting volume Bragg grating, a combining efficiency as high as 93.7% is achieved, resulting in a single beam with high spatial coherence. The result represents the highest output power achieved by spectral beam combining of two single element tapered diode lasers. Since s...
متن کاملMode Synchronization of External Cavity semiconductor Lasers
In the last 20 years external cavity semiconductor lasers (ECSLs) have been the subject of extensive research due to their importance for technical applications like optical fiber communications. One of the most detailed investigated dynamical phenomenon occurring in ECSLs are low frequency fluctuations (LFFs) [Fischer et al., 1996; Fischer et al., 1998]. The intensity of the laser oscillates a...
متن کاملExternal-Cavity Tapered Semiconductor Ring Lasers
Laser operation of a tapered semiconductor amplifier in a ring-oscillator configuration is presented. In first experiments, 1.75W time-average optical output power has been achieved at room temperature. Results for different configurations and feedback ratios are shown and compared to the output characteristics of the same device in a masteroscillator power-amplifier configuration. Dynamical an...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Express
سال: 2012
ISSN: 1094-4087
DOI: 10.1364/oe.20.023456