Power Coefficient Analysis of Double-blade Half-rotating Impeller Tidal Turbine Operating at Yaw
نویسندگان
چکیده
The double-blade half-rotating impeller tidal turbine (DHITT) is a new type of vertical shaft current with lift and resistance performance. power coefficient the DHITT affected by flow direction. In order to research ( C P ) under different direction, optimal attack angle half-impeller was explored, fluctuation operating at yaw analyzed based on angle. unsteady simulated overlapping grid technique, turbine’s directions analyzed, which verified experiments. results have demonstrated that 0.53. As greater than 30º, reduction nearly 40%, but average efficiency loss only 3.7% in range -3º 3º.
منابع مشابه
Tidal Steam Turbine Blade Fault Diagnosis Using Time-Frequency Analyses
Tidal Stream Turbines are developing renewable energy devices, for which proof of concept commercial devices are been deployed. The optimisation of such devices is supported by research activities. Operation within selected marine environments will lead to extreme dynamic loading and other problems. Further, such environments emphasise the need for condition monitoring and prognostics to suppor...
متن کاملDesign and testing of a contra-rotating tidal current turbine
A contra-rotating marine current turbine has a number of attractive features: near-zero reactive torque on the support structure, near-zero swirl in the wake, and high relative interrotor rotational speeds. Modified blade element modelling theory has been used to design and predict the characteristics of such a turbine, and a model turbine and test rig have been constructed. Tests in a towing t...
متن کاملMetallurgical fatigue failure analysis of the brazed steam turbine blade
In this paper, failure mechanism of a 17th stage blade of an 82.5 MW steam turbine that caused damage to the internal turbine compartment and the adjacent blade equipment has been studied. In order to determine the cause of failure and prevent similar events, various metallurgical and mechanical investigations including chemical composition analysis, metallography and microstructural analysis, ...
متن کاملMetallurgical fatigue failure analysis of the brazed steam turbine blade
In this paper, failure mechanism of a 17th stage blade of an 82.5 MW steam turbine that caused damage to the internal turbine compartment and the adjacent blade equipment has been studied. In order to determine the cause of failure and prevent similar events, various metallurgical and mechanical investigations including chemical composition analysis, metallography and microstructural analysis, ...
متن کاملAnalysis of the Fracture of a Turbine Blade
The cause of crack initiation turbine blade had initially cracked by a fatigue mechanism over a period of time and then fractured by the overload at the last moment. Experimental procedure consists of macroscopic inspection, material verification, microscopic examination, and metallographic analysis and finally FE. And for these procedures, some specimens were prepared from a fractured blade. Us...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: E3S web of conferences
سال: 2021
ISSN: ['2555-0403', '2267-1242']
DOI: https://doi.org/10.1051/e3sconf/202124203008