Potentiometric and Amperometric Glucose Sensor Using Proton-Conductive Thick-Film.
نویسندگان
چکیده
منابع مشابه
CO2 Selective Potentiometric Sensor in Thick-film Technology
A potentiometric sensor device based on screen-printed Nasicon films was investigated. In order to transfer the promising sensor concept of an open sodium titanate reference to thick film technology, "sodium-rich" and "sodium-poor" formulations were compared. While the "sodium-rich" composition was found to react with the ion conducting Nasicon during thermal treatment, the "sodium-poor" refere...
متن کاملA planar solid-state potentiometric CO2 sensor in thick-film technology for breath analysis
In this work, a planar solid-state potentiometric CO2 sensor for medical applications of the type CO2, O2, Au, Li2CO3-BaCO3 | Nasicon | Na2Ti6O13-TiO2, Au, O2, CO2 was developed in thick-film technology. Due to an integrated screen-printed platinum heater on the rear side, the sensor can be applied without changing its working temperature of 525°C in the main flow of the respiratory air of an i...
متن کاملPlanar Amperometric Glucose Sensor Based on Glucose Oxidase Immobilized by Chitosan Film on Prussian Blue Layer
A planar amperometric glucose microsensor based on glucose oxidase immobilized by chitosan film on Prussian Blue layer has been developed. The experimental results show that the optimum detection potential is 50 mV (versus Ag/AgCl) and the optimum pH is 6.5. Under the selective conditions the sensor exhibits excellent sensitivity of 98 nA/M and a linear range of 0.1-6.0 mM. The apparent Michane...
متن کاملPlanar Zeolite Film-Based Potentiometric Gas Sensors Manufactured by a Combined Thick-Film and Electroplating Technique
Zeolites are promising materials in the field of gas sensors. In this technology-oriented paper, a planar setup for potentiometric hydrocarbon and hydrogen gas sensors using zeolites as ionic sodium conductors is presented, in which the Pt-loaded Na-ZSM-5 zeolite is applied using a thick-film technique between two interdigitated gold electrodes and one of them is selectively covered for the fir...
متن کاملFabrication of a Flexible Amperometric Glucose Sensor Using Additive Processes.
This study details the use of printing and other additive processes to fabricate a novel amperometric glucose sensor. The sensor was fabricated using a Au coated 12.7 μm thick polyimide substrate as a starting material, where micro-contact printing, electrochemical plating, chloridization, electrohydrodynamic jet (e-jet) printing, and spin coating were used to pattern, deposit, chloridize, prin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: NIPPON KAGAKU KAISHI
سال: 1992
ISSN: 2185-0925,0369-4577
DOI: 10.1246/nikkashi.1992.902