Potential Use of Bio-Oleogel as Phase Change Material
نویسندگان
چکیده
Two bio-oleogels were investigated. These materials produced with a combination of canola and soybean oil 4, 6, 8, 10% beeswax (by weight). Sensible heat storage capacity, melting parameters, enthalpies investigated by the differential scanning calorimetry (DSC) test. An ordinary DSC dynamic test was performed. Cycles heating cooling performed, as well tests different rates. According to results, present temperature between −16 −12 °C total latent 22.9 367.6 J/g. BC10 (canola beeswax) sample best performance, J/g −13.6 °C, demonstrating its possible use phase change material for cold storage.
منابع مشابه
Microencapsulation of Butyl Stearate as Phase Change Material by Melamine Formaldehyde Shell for Thermal Energy Storage
Butyl stearate as a phase change material was microencapsulated within melamine-formaldehyde resin using emulsion polymerization. Morphology and thermal specification of produced microcapsules were studied by Fourier transform infrared spectroscopy, FT-IR, scanning electron microscopy, SEM, and Differential scanning calorimetry analysis, DSC. FT-IR spectra validated the existence of the butyl s...
متن کاملEffect of Using Nano Encapsulated Phase Change Material on Thermal Performance of Micro Heat Sink
The aim of this paper is to enhance thermal performance of a microchannel heat sink by using nanoencapsulated phase change material (NEPCM) slurry as a cooling fluid instead of pure fluid. A threedimensional model of a circular channel using water slurry of NEPCM was developed. The results show a significant reduction in the mean fluid temperature along the channel and heat sink wall temperatu...
متن کاملUse of Phase Change Material in a Building Wall Assembly: A Case Study of Technical Potential in Two Climates
Phase change material (PCM), placed in an exterior wall, alters the temperature profile within the wall and thus influences the heat transport through the wall. This may reduce the net energy transport through the wall via interactions with diurnal temperature swings in the external environment or reduce the electricity needed to meet the net load through the wall by shifting the time of the pe...
متن کاملOff - Peak Cooling Using Phase Change Material
The electric utilities in the United States are faced with continued rapid growth in electrical demand. The traditional response to growth in demand has been the expansion of generating capacity. However , economic, environmental, and scheduling constraints will combine to make adequate expansion difficult, if not impossible, in the 1980's. This thesis examines load management as an alternative...
متن کاملEnergy Savings Potential of Phase Change Material Integrated Building Envelope in South Texas
The performance of phase change material (PCM) integrated building envelope in terms of peak load reduction, peak load time delay and thermal demand improvement was investigated for a prototype detached single family house in a hot climate location. Five market available PCM layers, which can be easily inserted into traditional wall construction, were selected and coupled into different walls a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sustainability
سال: 2023
ISSN: ['2071-1050']
DOI: https://doi.org/10.3390/su15032534