Potential solidification/stabilization of clay-waste using green geopolymer remediation technologies
نویسندگان
چکیده
منابع مشابه
Potential of Marine Clay as Raw Material in Geopolymer Composite
In this research, marine clays has been studied its potential as a matrix composite materials that tend to be used as alternative materials to concrete. The study shows that marine clays which mixed with appropriate proportion of alkaline activator could have strength requirements for masonry cement. The alkaline activator that been used for the geopolymerisation reaction is sodium silicate and...
متن کاملWaste Engine Oil Remediation Using Low Cost Natural Clay Absorbent Material
The aim of the current research is to examine the potential of locally available natural clay mineral to act as an effective absorbent for waste engine oil treatment. The clay mineral was collected from the southern region of Saudi Arabia and was used without any kind of surface modification. The clay mineral was characterized by X-ray diffraction (XRD), X-ray fluorescence (XPS) and Braunner-Em...
متن کاملUtilization of Alumina Waste and Silica Waste for Geopolymer Production
This research studies the utilization of alumina waste and silica waste for geopolymer production. Alumina waste was obtained from aluminium thermal metallurgy industry, silica waste was obtained from silicone recycle industry in Thailand. This present study aimed at investigating the basic physical and chemical properties of waste materials and also the optimal proportion in geopolymer product...
متن کاملImprovement of Kaolinite Clay Subgrade Using Coir Fiber Waste
Abstract-Since highways are widely used modes, it is necessary that it should be maintained properly. Subgrade being the support for the whole pavement, it needs the utmost care in its construction. Many suggestions have been put forward by various scientists to improve the subgrade. The usually adopted methods are stabilization methods. This paper deals with the improvement of properties of ka...
متن کاملchemical recycling of polycarbonate waste using conventional heating and microwave assisted method
پلی کربنات یکی از پلاستیکهای مهمی است که به صورت گسترده در تولید لوحهای فشرده، قطعات رایانه، مواد ساختمانی و غیره مورد استفاده قرار می گیرد. این پلیمر بصورت عمده از تراکم مونومر بیس فنولa (bpa) و کربنیل کلرید یا دی متیل کربنات ها بدست می آید. در سالهای اخیر بازیافت شیمیایی پلی کربنات بیشتر مورد توجه بوده است. بازیافت شیمیایی پلی کربنات برای بدست آوردن مواد اولیه آن با روشهای متفاوتی مانند تجزی...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Process Safety and Environmental Protection
سال: 2018
ISSN: 0957-5820
DOI: 10.1016/j.psep.2018.06.013