Possible ways to minimize nitrosation reactions during post-combustion CO2 capture process
نویسندگان
چکیده
منابع مشابه
Control of a post-combustion CO2 capture plant during process start-up and load variations
Dynamic and flexible operation of a carbon capture plant is important as thermal power plants must be operated very flexibly to accommodate large shares of intermittent energy sources such as wind and solar energy. To facilitate such operation, dynamic models for simulation, optimization and control system design are crucial. In this paper, we present a dynamic mathematical model for the absorp...
متن کاملWet impregnation of a commercial low cost silica using DETA for a fast post-combustion CO2 capture process
This work presents an economic and simple method to manufacture low cost, but effective adsorbents for CO2 capture through impregnating DETA to a low cost, porous silica gel. The results have demonstrated that the low cost silica gel impregnated by low molecular-weight amine is stable and work very well at a temperature up to 130 C. The developed adsorbent has a fast adsorption kinetics and can...
متن کاملPost-Combustion Capture R&D at CSIRO
contact:Paul Feron phone: +61 (0) 2 4960 6022 email: [email protected] Introduction CSIRO has developed a post-combustion CO2 capture (PCC) R&D program consisting of two major components, a pilot plant programme and a laboratory research programme, which are operated in an integrated manner. The programme is almost exclusively focused on reactive liquid absorption liquids for the capture of C...
متن کاملSimulation of Co2 Capture Process
Carbon dioxide capture process has been simulated and studied under different process conditions. It has been shown that several process parameters such as lean amine temperature, number of adsorber stages, number of stripper stages and stripper pressure affect different process conditions and outputs such as carbon dioxide removal and reboiler duty. It may be concluded that the simulation of c...
متن کاملSystems Analysis of Ionic Liquids for Post-combustion CO2 Capture at Coal-fired Power Plants
The main objective of this study is to investigate the feasibility and costs of ionic liquid (IL)-based CO2 capture systems at pulverized coal-fired (PC) power plants. The IL selected for this assessment is trihexyl(tetradecyl)phosphonium 2-cyanopyrrolide ([P66614][2-CNpyr]), achieving a 1:1 and reversible chemical reaction between [2-CNpyr] and CO2. A multi-stage equilibrium-based modeling fra...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Greenhouse Gas Control
سال: 2014
ISSN: 1750-5836
DOI: 10.1016/j.ijggc.2014.09.028