Position-Dependent Cathode Degradation of Large Scale Membrane Electrode Assembly for Direct Methanol Fuel Cell

Membrane Electrode Assembly (mea) Design for Power Density Enhancement of Direct Methanol Fuel Cells (dmfcs)

Fabrication of Nanocomposite Membrane via Combined Electrospinning and Casting Technique for Direct Methanol Fuel Cell

Emergence of nanotechnology has resulted in the introduction of the electrospinning process in fabricating and characterising the polymer electrolyte membrane from the sulfonated poly (ether ether ketone) (SPEEK) nanocomposite membrane comprised of electrospun Cloisite15A® (e-spun CL...

Transient investigation of passive alkaline membrane direct methanol fuel cell

Passive direct methanol fuel cell (DMFC) is considered as an attractive power source for portable devices. In this study, a transient multiphase model for passive alkaline anion exchange membrane DMFC (AAEMDMFC) is developed. The results show that the power density decreases during the operation and is more difficult to maintain stable with higher current density or lower voltage. The fuel effi...

Novel synthesis of highly active Pt/C cathode electrocatalyst for direct methanol fuel cell.

A 40 wt% Pt/C cathode electrocatalyst with controlled Pt particle size of approximately 2.9 nm showing better performance than commercial catalyst for direct methanol fuel cell was prepared by a polyol process with water but without using stabilizing agent.

The effect of vertical injection of reactants to the membrane electrode assembly on the performance of a PEM fuel cell

In order to present a new and high performance structure of PEM fuel cell and study the influence of the flow direction and distribution on the rate of reactants diffusion, three novel models of vertical reactant flow injection into the anode and cathode reaction area field have been introduced. They consist of one inlet and two inlets and also a continuous channel. The governing equations on t...