Portable Light Pen 3D Vision Coordinate Measuring System- Probe Tip Center Calibration
نویسندگان
چکیده
منابع مشابه
Portable Light Pen 3D Vision Coordinate Measuring System- Probe Tip Center Calibration
For different tasks, probe tip should be changed in the 3D vision coordinate measuring system and the accurate determination of probe tip center position is critical. A novel and simple approach for calibrating the probe tip center position of the light pen is presented in this paper. Hundreds of images of the light pen with different postures are collected while the probe tip is kept in firm c...
متن کاملStylus Tip Center Position Self-Calibration Based on Invariable Distances in Light-Pen Systems
The light-pen coordinate measuring machine (LPCMM for short) is portable and flexible to measure features including invisible ones in-situ. Since different styluses are needed to measure different features and even during the process of measuring a single workpiece with complicated configurations, to improve the system measurement accuracy it is beneficial to calibrate the stylus tip center pos...
متن کاملA portable measuring system for robot calibration
Currently, much production time is lost in teaching and re-teaching robot programs. New techniques that avoid this, such as off-line programming, require an accurate kinematic model of the robot. To construct this model, measurements of the robot are required. At the University of Amsterdam a self-calibrating measuring system has been developed, using a camera mounted in the robot hand and a re...
متن کاملStereo Light Microscope Calibration for 3D Submicron Vision
The rapid development in micro-and nanotechnology has introduced new challenges to photogrammetry and computer vision. Microscopic imagery has to be seriously investigated by these communities. This paper represents a rst step in this direction. It addresses the calibration of Stereo Light Microscopes. Various new aspects have to be investigated when trying to develop computer vision and photog...
متن کاملLaser Tracker Calibration Using Coordinate Measuring Machine
This paper presents the achievement of a China NSFC project. A technique to calibrate laser tracker using CMM has been developed. A laser tracker with working range of 35m can be calibrated accurately and quickly using a CMM with working range of 1m. Studies have shown that angular errors are the key contributor to measuring errors of laser tracker. A device to measure angular errors of laser t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Measurement Science Review
سال: 2013
ISSN: 1335-8871
DOI: 10.2478/msr-2013-0030