Porous Ti-Si Alloys for Implants
نویسندگان
چکیده
منابع مشابه
TRIBOLOGICAL PROPERTIES OF Ti-Si-Zr ALLOYS
Nowadays titanium alloys are extensively used for aerospace and biomedical applications. However, despite good mechanical properties and excellent corrosion resistance they possess poor wear resistance and a tendency to galling and seizure. In this study the tribological properties of experimental Ti-Si-Zr based alloys were studied using a standard ball-on-disc wear testing system. The wear and...
متن کاملSurface elastic properties of Ti alloys modified for medical implants: a force spectroscopy study.
We report here the first nanoscale surface elasticity measurements on surface-modified titanium alloys using the force spectroscopy mode in scanning force microscopy. Samples of three vanadium-free titanium alloys, Ti-7Nb-6Al, Ti-13Nb-13Zr and Ti-15Zr-4Nb, were investigated. Surface modification of the three alloys was produced by thermal oxidation in air at 750 degrees C for different times, w...
متن کاملTi-alloys: Potential nano-modifier for Rocket Propellants
Composite solid propellants were prepared with and without nano-alloys (Ti-Co, Ti-Ni, Ti-Zn), where nano-alloys used as catalyst. These nano-alloys are prepared by hydrazine reduction method. Catalytic properties of these nanomaterials were measured on Ammonium perchorate/hydroxyterminatedpolybutadiene propellant by thermogravimetery analysis and differential thermal analysis. Both experimental...
متن کاملTi-alloys: Potential nano-modifier for Rocket Propellants
Composite solid propellants were prepared with and without nano-alloys (Ti-Co, Ti-Ni, Ti-Zn), where nano-alloys used as catalyst. These nano-alloys are prepared by hydrazine reduction method. Catalytic properties of these nanomaterials were measured on Ammonium perchorate/hydroxyterminatedpolybutadiene propellant by thermogravimetery analysis and differential thermal analysis. Both experimental...
متن کاملPorous organic alloys.
Another brick in the wall: Porous ternary cocrystals were prepared by chiral recognition between organic cage modules. One module, CC1, is ordered on 50 % of the lattice positions with respect to two other modules, CC3 and CC4, that are disordered across the other 50 % of sites (see picture). There is a linear relationship between relative module composition and the cocrystal lattice parameters.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Manufacturing Technology
سال: 2013
ISSN: 1213-2489,1213-2489
DOI: 10.21062/ujep/x.2013/a/1213-2489/mt/13/3/330