Porous materials for low-temperature H2S-removal in fuel cell applications
نویسندگان
چکیده
• Evaluation of experimental conditions for H 2 S adsorption capacity measurements. Desulphurisation performance porous materials at room temperatures is compared. Identification high performing metal oxides, activated carbon, zeolites and silicas. Analysis metal–organic frameworks with desulphurisation performance. Discussion future research directions temperature desulphurisation. When fuel gases (H CH 4 ) cells are produced from fossil fuels biomass, there a possibility presence hydrogen sulfide S). Because can poison cause long lasting damage, it necessary to rigorously remove before use in cells. With the advantages efficiency low energy consumption, via has attracted attention many researchers seen recent advances. This review compares commonly-studied (metal zeolites, silica, (MOF)) that used temperatures. Test such as feed gas compositions, velocity, breakthrough concentration threshold considered when comparing materials. High each material category identified discussed.
منابع مشابه
Chemical precipitation and characterization of multicomponent Perovskite Oxide nanoparticles – possible cathode materials for low temperature solid Oxide fuel cell
A set of multicomponent perovskite oxide nanoparticles based on La1-xSrxCo1-yFeyO3-δ(LSCF) were prepared by a simple chemical precipitation method for application in low temperature solid oxide fuel cells (LT-SOFC) as cathode materials. The precursor materials used in this synthesis were lanthanum nitrate hexahydrate [La(NO3)<su...
متن کاملChemical precipitation and characterization of multicomponent Perovskite Oxide nanoparticles – possible cathode materials for low temperature solid Oxide fuel cell
A set of multicomponent perovskite oxide nanoparticles based on La1-xSrxCo1-yFeyO3-δ(LSCF) were prepared by a simple chemical precipitation method for application in low temperature solid oxide fuel cells (LT-SOFC) as cathode materials. The precursor materials used in this synthesis were lanthanum nitrate hexahydrate [La(NO3)<su...
متن کاملPorous platinum nanowire arrays for direct ethanol fuel cell applications.
Porous Pt nanowire arrays show enhanced electrocatalytic activities for ethanol oxidation in direct alcohol fuel cells.
متن کاملchemical precipitation and characterization of multicomponent perovskite oxide nanoparticles – possible cathode materials for low temperature solid oxide fuel cell
a set of multicomponent perovskite oxide nanoparticles based on la1-xsrxco1-yfeyo3-δ(lscf) were prepared by a simple chemical precipitation method for application in low temperature solid oxide fuel cells (lt-sofc) as cathode materials. the precursor materials used in this synthesis were lanthanum nitrate hexahydrate [la(no3)3.6h2o], strontium nitrate [sr(no3)2], cobalt nitrate hexahydrate [co...
متن کاملMembranes produced by PECVD technique for low temperature fuel cell applications
A plasma polymerization process using a continuous glow discharge has been implemented for preparing proton conducting membranes from trifluoromethane sulfonic acid and styrene. The chemical and physical structure of plasma membranes has been investigated using FTIR and SEM. The films are homogeneous with a good adhesion on commercial gas diffusion layer (E-Tek). Their deposition rate can be in...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Separation and Purification Technology
سال: 2021
ISSN: ['1873-3794', '1383-5866']
DOI: https://doi.org/10.1016/j.seppur.2021.119426