Porous Ceramic Characteristics Sintered from Waste Diatomite and Sodium Silicate Sand
نویسندگان
چکیده
منابع مشابه
Sintered glass–ceramic from municipal solid waste incinerator ashes
In the present study, the sinter-crystallization behavior of a glass from municipal solid waste incineration ashes was investigated. The crystallization kinetics were estimated by DTA at different heating rates and the formed crystalline phases were evaluated by XRD. The sintering was studied at different heating rates and at different holding temperatures by dilatometry, measuring the % of lin...
متن کاملSintered Steel Composites Reinforced with Ceramic Nanoparticles: Fabrication, Characteristics and Wear Behavior
Steel composites reinforced with alumina nanoparticles were prepared by powder metallurgy process. Samples containing two different amounts of carbon (0.35 and 0.55 wt.%) and 0-5 wt.% Al2O3 nanoparticles were fabricated by mixing, compacting and sintering of diffusion bonded Distaloy AE powder. The density, hardness and wear tests were performed on the prepared samples. Fu...
متن کاملSintered hydroxyapatite ceramic for wear studies.
A sintered hydroxyapatite (HAP) ceramic for use in wear studies was prepared from a commercial tricalcium phosphate. The sintered HAP had physical properties close to those of human enamel. The coefficient of friction and wear of the sintered HAP ceramic as characterized by tangential force, track width, and surface failure data, approximated those of human enamel.
متن کاملStructural and Electrical Characterization of Sintered Silicon Nitride Ceramic
The electrical conduction phenomena, dielectric response and microstructure have been discussed in sintered silicon nitride ceramics at different temperature and frequencies. Microstructure and phase of the sintered samples was investigated by Scanning Electron Microscope (SEM) and X-ray diffractometer (XRD). The electrical conductivity, dielectric constant and dielectric loss increases exponen...
متن کاملViscoelastic behaviour of porous sintered steels compact
This paper describes the viscoelastic behaviour of sintered steels with porosities of 12, 20 and 33%, using a dynamic mechanical analyser. Test specimens were prepared from premix powders of 100–150 mm size by a process of die compaction, delubrication and sintering. The influences of test temperature and vibrational frequency on storage and loss modulus and tangent delta have been investigated...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Materials, Mechanics and Manufacturing
سال: 2013
ISSN: 1793-8198
DOI: 10.7763/ijmmm.2013.v1.51