Pore Structure Characteristics of Foam Composite with Active Carbon
نویسندگان
چکیده
منابع مشابه
Preparation of Ceramic Composite Filter with Titanium Oxide Nanoparticles and Active Carbon Content for Treatment of Sea Water
In this mentioned study for sea water treatment ceramic composites were made from natural alumina and adsorbent active ingredients. According to the experimental results, filters along with active agents have acceptable effects on drinking water parameters and contaminants in compare with 1053 ISIRI standard. Modular set up was made for sea water treatment tests. Water flowrate after filtration...
متن کاملCharacteristics of Pore Structure and Fractal Dimension of Isometamorphic Anthracite
The geologic conditions of No. 3 coal seams are similar to Sihe and Zhaozhuang Collieries, however, the gas production is significantly different. To better understand the effect of pores, by means of experimental measurements and quantitative analysis, the pore properties of high-rank isometamorphic anthracite were thoroughly studied. Our study showed that the pore structures were predominantl...
متن کاملThe Pore Characteristics of Geopolymer Foam Concrete and Their Impact on the Compressive Strength and Modulus
The pore characteristics of geopolymer foam concretes (GFCs) manufactured in the laboratory with 0–16% foam additions were examined using image analysis (IA) and vacuum water saturation techniques. The pore size distribution, pore shape, and porosity were obtained. The IA method provides a suitable approach to obtain the information of large pores, which are more important in affecting the comp...
متن کاملFoam invasion through a single pore.
We investigate experimentally the behavior of liquid foams pumped at a given flow rate through a single pore, in the situation where the pore diameter is smaller than the bubble diameter. Results reveal that foam invasion can be observed only within a restricted range of values for the dimensionless flow rate and the foam liquid fraction. Within this foam invasion regime, the liquid content of ...
متن کاملInvestigation of Activation Time on Pore Size Distribution of Activated Carbon Determined with Different Methods
Three activated carbons are synthesized in a rotary reactor at different activation times. The adsorption isotherms of the samples are measured The pore size distribution of the samples is determined using combined Saito and Foley method, BJH method. An average potential function has been determined inside the cylindrical pores. The effect of activation time on the pore size distribution sample...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2020
ISSN: 1996-1944
DOI: 10.3390/ma13184038