Pore Structure and Methane Adsorption Properties of Surface Modified Activated Carbon
نویسندگان
چکیده
منابع مشابه
Adsorption of hydrogen sulfide onto activated carbon fibers: effect of pore structure and surface chemistry.
To understand the nature of H2S adsorption onto carbon surfaces under dry and anoxic conditions, the effects of carbon pore structure and surface chemistry were studied using activated carbon fibers (ACFs) with different pore structures and surface areas. Surface pretreatments, including oxidation and heattreatment, were conducted before adsorption/desorption tests in a fixed-bed reactor. Raw A...
متن کاملAdsorption of methyl mercaptan on surface modified activated carbon.
The influence of surface modification of activated carbon on the adsorption of methyl mercaptan in N(2) was investigated. The modification of the activated carbon was carried out by treatment with HNO(3)/H(2)SO(4) solutions, heat-treatment in Ar, and adsorption of cetylamine. Acid-treatment increased the adsorption of methyl mercaptan compared with the original activated carbon, and the adsorbe...
متن کاملCo2 Adsorption by Surface Modified Carbon Sorbents
Anthropogenic emissions have increased the CO2 concentration on the atmosphere with over 30% compared to pre-industrialize levels [1]. Most of these anthropogenic emissions are caused by fossil fuel utilization, where around one-third is due to electricity generation from fossil fuel combustion, mainly from coal-fired units. Furthermore, fossil fuel electricity generation units rank as the firs...
متن کاملExperimental Investigation and Modeling of CO2 Adsorption Using Modified Activated Carbon
In this research, Activated Carbon (AC) was modified using a sodium hydroxide solution for CO2 adsorption. Adsorption experiments were carried out in a batch reactor at a temperature range of 20-80°C and a pressure range of 2-10 bars to investigate kinetic, isotherm, and thermodynamic of the CO2 adsorption process. Activated carbon was modified with NaOH solution conce...
متن کاملinvestigation of the electronic properties of carbon and iii-v nanotubes
boron nitride semiconducting zigzag swcnt, $b_{cb}$$n_{cn}$$c_{1-cb-cn}$, as a potential candidate for making nanoelectronic devices was examined. in contrast to the previous dft calculations, wherein just one boron and nitrogen doping configuration have been considered, here for the average over all possible configurations, density of states (dos) was calculated in terms of boron and nitrogen ...
15 صفحه اولذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TANSO
سال: 2002
ISSN: 1884-5495,0371-5345
DOI: 10.7209/tanso.2002.123