Pore Level Simulation of Miscible Injection with Gravity Domination
نویسندگان
چکیده
منابع مشابه
Pore-scale Simulation of Water Alternate Gas Injection
We use a three-dimensional mixed-wet random network model representing Berea sandstone to compute displacement paths and relative permeabilities for water alternating gas (WAG) flooding. First we reproduce cycles of water and gas injection observed in previously published experimental studies. We predict the measured oil, water and gas relative permeabilities accurately. We discuss the hysteres...
متن کاملHybrid Simulation of Miscible Mixing with Viscous Fingering
By modeling mass transfer phenomena, we simulate solids and liquids dissolving or changing to other substances. We also deal with the very small-scale phenomena that occur when a fluid spreads out at the interface of another fluid. We model the pressure at the interfaces between fluids with Darcy’s Law and represent the viscous fingering phenomenon in which a fluid interface spreads out with a ...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Miscible porous media displacements driven by non-vertical injection wells
High-resolution simulations are employed to identify and analyse the mechanisms dominating miscible porous media displacements generated by inclined injection wells. Compared to vertical injection wells, significant differences are observed that strongly influence breakthrough times and recovery rates. Constant density and viscosity displacements, for which the velocity field is potential in na...
متن کاملHigh-Level Simulation for Multiple Fault Injection Evaluation
Faults injection attacks have become a hot topic in the domain of smartcards. This work exposes a source code-base simulation approach designed to evaluate the robustness of high-level secured implementations against single and multiple fault injections. In addition to an unprotected CRT-RSA implementation, we successfully attacked two countermeasures with the high-level simulation under the da...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energy Procedia
سال: 2013
ISSN: 1876-6102
DOI: 10.1016/j.egypro.2013.06.621