Pool boiling on rectangular fins with tunnel-pore structure

Secondary pool boiling effects

Transient pool boiling in microgravityt

Transient nucleate pool boiling experiments using R113 are conducted for short times in microgravity and in earth gravity with different heater surface orientations and subcoolings. The heating surface is a transparent gold film sputtered on a quartz substrate, which simultaneously provides surface temperature measurements and permits viewing of the boiling process from beneath. For the microgr...

Thermal Assessment of Naturally Cooled Electronic Enclosures With Rectangular Fins

Passive heat transfer from enclosures with rectangular fins is studied both experimentally and theoretically. Several sample enclosures with various lengths are prepared and tested. To calibrate the thermal measurements and the analyses, enclosures without fins (“bare” enclosures) are also prepared and tested. Surface temperature distribution is determined for various enclosure lengths and heat...

Pool Boiling Heat Transfer in Water/Amines Solutions

In this investigation, nucleate boiling heat transfer coefficients were experimentally measured during pool boiling of mixtures, consisting of water/monoethanolamine and water/diethanolamine on a horizontal heating rod, under atmospheric pressure. The experiment was carried out below 205 kW.m-2 heat flux, over a wide range of concentrations. These experiments include, measurement of pool boilin...

Boiling heat transfer on a simulated nuclear fuel rod with annular fins

This work describes an improved design for a nuclear fuel rod, which was developed using an experimental circuit that simulates the nuclear rod environment in a pressurized water reactor (PWR). The heat exchanger circuit runs atmospheric to high-pressure boiling water through an annular finned tube (153 fins), which is used to enhance confined heat transfer rates and guide the nucleate boiling ...