Polyvinylpyridine–carbon dots composite-based novel humidity sensor
نویسندگان
چکیده
Abstract This work describes the rational design of thin films based on PVP-modified carbon dots for potential resistive humidity sensing application, prepared via spin coating ITO substrates. The modified were manufactured from graphite waste and with PVP to test synergetic effect two materials. surface hydrophilicity, morphology, properties studied. AFM has been performed investigate films’ texture distribution over surface. Overall, hydrophilicity increases concentration, leading enhanced water vapor absorption film. As a result, sensor’s sensitivity is improved increasing concentration PVP–CDs. electrical response PVP–CDs composite film sensor shows higher level above 80% RH an irregular response; however, 0.5 wt%, sensitivity, linear change in impedance was noted compared other concentrations.
منابع مشابه
Silver nanoparticle polymer composite based humidity sensor.
Silver nanoparticles were synthesised by a chemical reduction process in order to produce an aqueous colloidal dispersion. The resulting colloids were then characterised by a combination of UV-Vis spectroscopy, dynamic light scattering, X-ray diffraction and transmission electron microscopy and the nanoparticles were found to have an average diameter of 20-22 nm. The Ag/polymer nanocomposites w...
متن کاملFrequency Dependence of Electrical Parameters of an Organic-Inorganic Hybrid Composite Based Humidity Sensor
The present study highlights the interdependence of ambient humidity levels on the electrical parameters of organic-inorganic hybrid composite based humidity sensor at varied AC frequencies of input signal. Starting from the bottom, the layer stack of the fabricated humidity sensor was 200-nm silver (Ag) thin film and 4 μm spun-coated PEPC+NiPC+Cu2O active layer. Silver thin films were deposite...
متن کاملDevelopment of High Sensitivity Humidity Sensor Based on Gray TiO2/SrTiO3 Composite
A gray TiO₂/SrTiO₃ composite nanocrystalline sensor with narrow band-gap was successfully prepared through a facile wet chemical method. The precursor was calcined in N₂ flow under atmospheric pressure and thereafter, a humidity sensor based on the composite was fabricated. The sensor showed high resistive sensitivity and varied by more than four orders of magnitude with an increase in relative...
متن کاملColorimetric humidity sensor based on liquid composite materials for the monitoring of food and pharmaceuticals.
Using supported ionic-liquid membrane (SILM)-inspired methodologies, we have synthesized, characterized, and developed a humidity sensor by coating a liquid composite material onto a hygroscopic, porous substrate. Similar to pH paper, the sensor responds to the environment's relative humidity and changes color accordingly. The humidity indicator is prepared by casting a few microliters of low-t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Physics A
سال: 2023
ISSN: ['1432-0630', '0947-8396']
DOI: https://doi.org/10.1007/s00339-023-06908-3