Polyvinyl alcohol nanofibrous membrane by high-curvature solid-needle electrospinning: Numerical simulation and experimental verification

نویسندگان

چکیده

Herein, polyvinyl alcohol nanofibrous membrane was fabricated firstly by the high-curvature solid-needle electrospinning. The influence of electrode curvature (needle angle), spinning voltage, solution concentration and collector distance on nanofiber morphology systematically investigated numerically experimentally. Numerical simulation shows that electrical field increases with increase while decreases needle angle distance. experimental results are consistent numerical results. Furthermore, can be used to adjust diameter nanofibers. possible applications energy generation, water treatment, separation also discussed.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Fabrication of Polyvinyl Alcohol/Kefiran Nanofibers Membrane Using Electrospinning

The Poly (vinyl alcohol)/Kefirane nanofiber membrane was successfully fabricated for the firsttime using electrospinning of the polyvinyl alcohol (PVA) and Kefirane blend solution. Scanningelectron microscope (SEM), attenuated total reflectance Fourier transform infrared (ATRFT-IR), and differential scanning calorimetry (DSC) were used to characterize the electrospunPoly (vinyl alcohol)/Kefiran...

متن کامل

Studies on the use of recombinant spider silk protein/polyvinyl alcohol electrospinning membrane as wound dressing

A series of wound membranes of polyvinyl alcohol and recombinant spider silk protein (pNSR16) was prepared by electrospinning. The membrane was analyzed by scanning electron microscopy, atomic force microscopy, and Fourier transform infrared spectroscopy. The result showed that the three factors that affected average fiber diameter from high to low were, voltage, flow speed, and solidification ...

متن کامل

EFFECT OF OPERATING CONDITIONS ON THE DEHYDRATION OF TOLUENE BY PERVAPORATION USING A POLYVINYL ALCOHOL MEMBRANE

The effects of operating parameters such as feed temperature and permeate-side pressure on the performance of a commercial PVA membrane in the dehydration of toluene by a pervaporation (PV) membrane system is studied in the present work. The results obtained indicate that increasing temperature in the range of 40 to 70 °C and reducing permeate pressure in the range of 1 to 10 mmHg increase memb...

متن کامل

Coupled numerical simulation of hot stamping process and experimental verification

Hot stamping process is a high non-linear process showing the effect on thermal, mechanical and metallurgical phenomena as they relate to each other. In order to carry out this coupled numerical simulation, fundamental thermal properties such as interfacial heat transfer coefficient and convection heat transfer coefficient as well as crucial mechanics properties were first investigated. Hot sta...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Thermal Science

سال: 2023

ISSN: ['0354-9836', '2334-7163']

DOI: https://doi.org/10.2298/tsci2303993x