Polythiophene–perylene diimide heterojunction field-effect transistors

Investigation of InAs/InGaAs/InP Heterojunction Tunneling Field-Effect Transistors

Tunneling field-effect transistors (TFETs) are very applicable to low standby-power application by their virtues of low off-current (Ioff) and small subthreshold swing (S). However, low on-current (Ion) of silicon-based TFETs has been pointed out as a drawback. To improve Ion of TFET, a gate-all-around (GAA) TFET based on III-V compound semiconductor with InAs/InGaAs/InP multiple-heterojunction...

Effect of hydrostatic pressure on the dc characteristics of AlGaNâ‹ŁGaN heterojunction field effect transistors

V. Heterojunction Bipolar Transistors

AlGaAs/GaAs heterojunction bipolar transistors (HBTs) are used for digital and analog microwave applications with frequencies as high as Ku band. HBTs can provide faster switching speeds than silicon bipolar transistors mainly because of reduced base resistance and collector-to-substrate capacitance. HBT processing requires less demanding lithography than GaAs FETs, therefore, HBTs can cost les...

Diamond Field Effect Transistors

High-quality single crystal diamond has been used to demonstrate the RF performance of hydrogenterminated diamond field effect transistors of varying gate lengths; this includes the first data on a sub100nm diamond transistor. The RF performance for 220nm, 120nm and 50nm gate length transistors was extracted and a cut-off frequency of 55 GHz was measured for the 50nm device. This is the highest...

Transient characteristics of Al x Ga 1x N/GaN heterojunction field-effect transistors