Polypropylene Fibers as Reinforcements of Polyester-Based Composites
نویسندگان
چکیده
منابع مشابه
Fracture Toughness of Polypropylene-Based Particulate Composites
The fracture behaviour of polymers is strongly affected by the addition of rigid particles. Several features of the particles have a decisive influence on the values of the fracture toughness: shape and size, chemical nature, surface nature, concentration by volume, and orientation. Among those of thermoplastic matrix, polypropylene (PP) composites are the most industrially employed for many di...
متن کاملBiofiber-Reinforced Polypropylene Composites
Biofibers. natural lignocellulosics, have an outstanding potential a s a reinforcement in thermoplastics. This study deals with the preparation of lignocellulosic composites by reactive extrusion processing in which good interfacial adhesion is generated by a combination of fiber modification and matrix modification methods. PP matrix was modified by reacting with maleic anhydride and subsequen...
متن کاملEffect of Filler Type on some Physical and Mechanical Proparties of Carbon Fibers / Polyester Composites
In the present study, traditional and hybrid composites were prepared by Hand lay-up molding and investigated. The composites constituents were unsaturated polyester resin as the matrix, 3% and 6% volume fractions of carbon fibers as reinforcement and 3% of Al2O3, Al, Cement and local Gypsum (calcium sulfate anhydrate CaSO4) as filler particles. The investigated physical properties were density...
متن کاملPolypropylene Biocomposites with Boron Nitride and Nanohydroxyapatite Reinforcements
In this study, we develop binary polypropylene (PP) composites with hexagonal boron nitride (hBN) nanoplatelets and ternary hybrids reinforced with hBN and nanohydroxyapatite (nHA). Filler hybridization is a sound approach to make novel nanocomposites with useful biological and mechanical properties. Tensile test, osteoblastic cell culture and dimethyl thiazolyl diphenyl tetrazolium (MTT) assay...
متن کاملmechanical properties of non-woven polyester fibers and polymer-modified bitumen composites
blown bitumen (110/10) was mixed with heavy vacuum slops (h.v.s), 60/70 penetration grade bitumen and recycled isotactic polypropylene (ipp) at different levels. the resulting resins were used to impregnate non-woven poly(ethylene terephthalate) fibers to form composites. the modulus and penetration grade of the resulting bituminous resins were determined. it was found that these bituminous res...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Polymer Science
سال: 2013
ISSN: 1687-9422,1687-9430
DOI: 10.1155/2013/143894