Poly(Lactic Acid) and Poly(Butylene Succinate) Blend Fibers Prepared by Melt Spinning Technique
نویسندگان
چکیده
منابع مشابه
Hydrogen Storage Properties and Structure of Magnesium-Based Alloys Prepared with Melt-Spinning Technique
© 2012 Tanaka, licensee InTech. This is an open access chapter distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/3.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Hydrogen Storage Properties and Structure of Magnesium-Based Alloys Prepared with Melt-Spinn...
متن کاملDesign and Optimization of Novel Sugar Alcohol Based Extended Release Tablets Prepared by Melt Dispersion Technique
The aim of this study is to prepare novel sorbitol based extended release tablets by melt dispersion method using carbamazepine as a model drug. Carbamazepine was melted along with sugar alcohol to get melt dispersion granules (MGDs) and was characterized by differential scanning calorimetry (DSC), powder X-ray diffractometry (XRD) and solubility study. The physical and chemical parameters...
متن کاملComposite Fibers from Recycled Plastics Using Melt Centrifugal Spinning
New methods are being developed to enable the production of value-added materials from high-volume, low-cost feedstocks arising from domestic recycling streams. In this work, recycled bottle-grade polyethylene terephthalate, polystyrene, and polypropylene were spun into fibers from the melt using a centrifugal spinning technique. Mono-component fibers and 50/50 blends of each polymer and a 33/3...
متن کاملThermal Stability of P-Type BiSbTe Alloys Prepared by Melt Spinning and Rapid Sintering
P-type BiSbTe alloys have been widely implemented in waste heat recovery from low-grade heat sources below 600 K, which may involve assorted environments and conditions, such as long-term service, high-temperature exposure (generally 473-573 K) and mechanical forces. It is important to evaluate the service performance of these materials in order to prevent possible failures in advance and exten...
متن کاملBiocomposite from polylactic acid and lignocellulosic fibers: structure-property correlations.
PLA biocomposites were prepared using three corn cob fractions and a wood fiber as reference. The composites were characterized by tensile testing, scanning electron microscopy (SEM) and polarization optical microscopy (POM). Micromechanical deformation processes were followed by acoustic emission measurements. The different strength of the components was proved by direct measurements. Two cons...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energy Procedia
سال: 2013
ISSN: 1876-6102
DOI: 10.1016/j.egypro.2013.06.777