Polyimide Film Formation by Means of Electrodeposition Coating.
نویسندگان
چکیده
منابع مشابه
suppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولThick-film permanent magnets by membrane electrodeposition
Thick films of nearly equiatomic Co–Pt produced by electrodeposition into nanoporous membranes exhibit an isotropic magnetic phase with square hysteresis loops sMr /Ms=0.95d and coercivity of up to 1.3 T. The initial magnetization curve is characteristic of pinning-type magnets. The coercivity can be controlled by the choice of annealing temperature or alloy composition, which depends on the ch...
متن کاملSurface coating of carbon nanofibers/nanotubes by electrodeposition for multifunctionalization.
Carbon nanomaterials in the form of paper sheets have been used as platforms to achieve multifunctionality. Combined with electrochemical deposition, room temperature synthesis of magnetic Ni coatings on individual carbon nanofibers (CNF) and/or carbon nanotubes (CNT) has been realized through solution penetration and ion diffusion. In addition to significant electrical conductivity improvement...
متن کاملMulti-Walled Carbon Nanotube-Assisted Electrodeposition of Silver Dendrite Coating as a Catalytic Film
A multi-walled carbon nanotube (MWCNT)-coated indium tin oxide (ITO) slide was used as a platform for the growth of a silver dendrite (Ag-D) film using cyclic voltammetry. The particular dendritic nanostructures were formed by the diffusion-limited-aggregation model due to the potential difference between the MWCNTs and the ITO surface. The Ag-D-coated ITO film was then used for the catalytic d...
متن کاملNumerical Simulation of Film Formation in Tablet Coating
The application of a coating layer on a tablet is a commonly used technique to selectively control tablet characteristics. Among the most important functions of the coating is the regulation of the release of active ingredient. In the course of a typical coating process, the tablet passes a spray zone multiple times. Each time, a partial coating layer is applied. For each tablet, this is repeat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Institute of Electronics Packaging
سال: 2002
ISSN: 1343-9677,1884-121X
DOI: 10.5104/jiep.5.233