Poly(Ethylene Piperidinium)s for Anion Exchange Membranes
نویسندگان
چکیده
Abstract The lack of anion exchange membranes (AEMs) that possess both high hydroxide conductivity and stable mechanical chemical properties poses a major challenge to the development high‐performance fuel cells. Improving one side balance between stability usually means sacrificing other. Herein, we used facile, high‐yield reactions design synthesize piperidinium polymer with polyethylene backbone for AEM cell applications. To improve performance, introduced ionic crosslinking into high‐cationic‐ratio AEMs suppress water uptake swelling while further improving conductivity. Remarkably, PEP80‐20PS achieved 354.3 mS cm −1 at 80 °C remaining mechanically stable. Compared base PEP80, decreased by 69 % from 813 350 %, substantially 85 350.0 50.2 °C. also showed excellent alkaline stability, 84.7 remained after 35 days treatment an aqueous KOH solution. in this study represents significant advancement toward simultaneously highly conductive
منابع مشابه
Polysulfone-based Anion Exchange Membranes for Potential Application in Solid Alkaline Fuel Cells
In present research work, anion exchange membranes based on quaternized polysulfone with ammonium cation moieties (QAPSF) were prepared by chloromethylation, amination and alkalization. The chloromethylated polysulfone were characterized by 1HNMR spectroscopy and functionalization degree was determined according to peak area integration. Ion transport properties (ionic conductivity, ion exchang...
متن کاملElectrodialysis Heterogeneous Anion Exchange Membranes Filled with TiO2 Nanoparticles: Membranes' Fabrication and Characterization
In the current research, polyvinylchloride based mixed matrix heterogeneous anion exchange membranes were prepared by a solution casting technique. Titanium dioxide nanoparticles were also utilized as inorganic filler additive in the membrane fabrication. The effect of TiO2 nanoparticles concentration in the casting solution on the membrane physico-chemical properties was studied. Membrane wate...
متن کاملAlkaline Anion Exchange Membranes for Fuel Cells- a Patent Review
Recently, Alkaline Polymer Electrolyte Membrane Fuel Cells (APEMFCs) have been attracting worldwide attention mainly due to the prospect of using non–platinum–group metal catalysts. In addition, there is growing evidence that these fuel cells can operate with the presence of carbonate. This mini review will introduce the state–of–the–art in understanding of alkaline anion–exchange membranes (AA...
متن کاملAnion- or Cation-Exchange Membranes for NaBH4/H2O2 Fuel Cells?
Direct borohydride fuel cells (DBFC), which operate on sodium borohydride (NaBH4) as the fuel, and hydrogen peroxide (H2O2) as the oxidant, are receiving increasing attention. This is due to their promising use as power sources for space and underwater applications, where air is not available and gas storage poses obvious problems. One key factor to improve the performance of DBFCs concerns the...
متن کاملelectrodialysis heterogeneous anion exchange membranes filled with tio2 nanoparticles: membranes' fabrication and characterization
in the current research, polyvinylchloride based mixed matrix heterogeneous anion exchange membranes were prepared by a solution casting technique. titanium dioxide nanoparticles were also utilized as inorganic filler additive in the membrane fabrication. the effect of tio2 nanoparticles concentration in the casting solution on the membrane physico-chemical properties was studied. membrane wate...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Angewandte Chemie
سال: 2023
ISSN: ['1521-3773', '1433-7851', '0570-0833']
DOI: https://doi.org/10.1002/ange.202307690