Polyethersulfone flat sheet and hollow fiber membranes from solutions in ionic liquids

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Polyethersulfone Hollow Fiber Membranes for Hemodialysis

Polyethersulfone (PES) is one of the most important polymeric materials and is widely used in separation fields. PES and PES-based membranes show outstanding oxidative, thermal and hydrolytic stability as well as good mechanical and film-forming properties. PES membranes could endure many kinds of sterilized methods, including epoxy ethane gas, steam, and γ-ray. Furthermore, PES-based membranes...

متن کامل

An Experimental Study on the Oily Wastewaters Treatment by Polyethersulfone (PES) Nanostructure Hollow Fiber Membranes

Oily wastewaters from oil refineries and oil distribution centers are one of the most important environmental concerns in recent decades; therefore, it is critical to treat these types of wastewaters. In this study, the performance of different polyethersulfone hollow fiber membranes in oily wastewaters treatment was investigated and the effects of operating conditions such as transmembrane pre...

متن کامل

Carbon Nanotube/Alumina/Polyethersulfone Hybrid Hollow Fiber Membranes with Enhanced Mechanical and Anti-Fouling Properties

Carbon nanotubes (CNTs) were incorporated into alumina/polyethersulfone hollow fibre membranes to enhance the mechanical property and the efficiency of water treatment. Results show that the incorporation of CNTs can greatly limit the formation of large surface pores, decrease the void size in support layers and improve the porosity and pore connectivity of alumina/polyethersulfone membranes. A...

متن کامل

Failure Mechanisms of Hollow Fiber Supported Ionic Liquid Membranes

Hollow fiber supported ionic liquid membranes (SILMs) were tested using the bubble point method to investigate potential failure modes, including the maximum transmembrane pressure before loss of the ionic liquid from the support. Porous hollow fiber supports were fabricated with different pore morphologies using Matrimid(®) and Torlon(®) as the polymeric material and 1-hexyl-3-methylimidalzoli...

متن کامل

Glycerin Removal from Ultrafiltration Flat Sheet Membranes by Filtration and Soaking

comIn the case of pharmaceutical processes, the presence of preservatives can be problematic and the quantity is subject to stringent standards. So, the aim of this study is to quantify the removal of glycerin contained in ultrafiltration flat sheet membranes by filtration and soaking. This is carried out over a wide range of membranes with different characteristics. The selected flat sheet mem...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Membrane Science

سال: 2017

ISSN: 0376-7388

DOI: 10.1016/j.memsci.2017.06.001