Poly-para-xylylene enhanced Fe-based amorphous powder cores with improved soft magnetic properties via chemical vapor deposition
نویسندگان
چکیده
منابع مشابه
Electrically charged selectivity of poly-para-xylylene deposition.
The bottom-up patterning approach provides intrinsic advantages associated with unlimited resolution but is limited by the materials available for selection. A general and simple approach towards the selective deposition of poly-para-xylylenes is introduced in this communication. The chemical vapour deposition (CVD) of poly-para-xylylenes is inhibited on the high-energy surfaces of electrically...
متن کاملDetermination of Optical Properties in Germanium Carbon Coatings Deposited by Plasma Enhanced Chemical Vapor Deposition
In this research, Germanium-carbon coatings were deposited on ZnS substrates by plasma enhanced chemical vapor deposition (PECVD) using GeH4 and CH4 precursors. Optical parameters of the Ge1-xCx coating such as refractive index, Absorption coefficient, extinction coefficient and band gap were measured by the Swanepoel method based on the transmittance spectrum. The results showed that the refra...
متن کاملTungsten Doped TiO2 with Enhanced Photocatalytic and Optoelectrical Properties via Aerosol Assisted Chemical Vapor Deposition
Tungsten doped titanium dioxide films with both transparent conducting oxide (TCO) and photocatalytic properties were produced via aerosol-assisted chemical vapor deposition of titanium ethoxide and dopant concentrations of tungsten ethoxide at 500 °C from a toluene solution. The films were anatase TiO2, with good n-type electrical conductivities as determined via Hall effect measurements. The ...
متن کاملEffect of Ribbon Width on the Magnetic Properties of Fe- based Amorphous Cores
The effects of different ribbon widths on the magnetic properties of an amorphous alloy were studied. DSC, TGA, XRD, VSM, SEM and ER techniques were used. For SA1 alloy, the sample during primary crystallization for the 142mm and 213mm width ribbons are quite similar; however the magnetic properties and morphologies are significantly different. Finally, the measurements of a three-phase 2MVA am...
متن کاملFabrication of Soft Magnetic Fe-based Nanoalloy
The Fe-Ni-Sb-B amorphous alloy has been prepared by a solid-solid chemical reaction of ferric trichloride, nickel chloride, antimony chloride and potassium borohydride powders at room temperature. The inductive couple plasma study indicates that the resultant is composed of Fe 5.38 %, Ni 56.19 %, Sb 29.02 % and B 0.44 %. The XRD and thermal analysis show that the alloy is a non-strict sense amo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials & Design
سال: 2020
ISSN: 0264-1275
DOI: 10.1016/j.matdes.2020.108650