Polarographic determination of tin in lead alloy
نویسندگان
چکیده
منابع مشابه
Polarographic determination of malononitrile.
A procedure is proposed for the determination of malononitrile by differential pulse polarography in methanolic 0.1M tetraethylammonium iodide/0.001M tetramethylammonium hydroxide as the supporting electrolyte. In this medium malononitrile is chemically converted into an electroactive species. With close control of timing of the steps in the procedure the error of the method is +/-1.5% in the c...
متن کاملThe polarographic determination of selenium in urine.
Polarographicdata are presented for the reduction of selenite ion in 3M sulfuric acid, 1M potassium chloride, and 1M ammonia-ammonium chloride. In these first two media two waves are obtained correspondingto the diffusion-controlled reduction of selenite ion to selenium amalgam and the adsorption of selenite ion on the mercury drop, respectively. One wave is obtained in ammonia-ammonium chlorid...
متن کاملCavity mediated strain localization and overall ductility in eutectic tin-lead alloy
A combined experimental and numerical study is undertaken to examine the effects of pre-machined holes on strain localization and overall ductility in eutectic tin-lead alloy. Thin-sheet specimens with equal-sized holes aligned in the tensile loading direction are used. The tensile tests were performed at room temperature with a nominal strain rate of 0.001 s . The specimen, containing one hole...
متن کاملThe Impact of Reflowing A Pbfree Solder Alloy Using A Tin/Lead Solder Alloy Reflow Profile On Solder Joint Integrity
The electronics industry is undergoing a materials evolution due to the pending Restriction of Hazardous Substances (RoHS) European Directive. Printed wiring board laminate suppliers, component fabricators, and printed wiring assembly operations are engaged in a multitude of investigations to determine what leadfree (Pbfree) material choices best fit their needs. The size and complexity of Pbfr...
متن کاملGrain refinement, Microstructural characterization, and tensile properties of die-cast AZ91 alloy via Lead and Tin additions
Effects of different amounts of lead (Pb) and tin (Sn) on microstructure and tensile properties of the AZ91 alloy were studied. The results presented that the microstructure of AZ91 alloy is consisted the α-Mg phase and semi-continuous network of β-Mg17Al12 intermetallics. For the as-cast AZ91 alloy, the average grain siz and the β phase volume fraction were 96.2 µm and of 25.3%, respectively. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: BUNSEKI KAGAKU
سال: 1957
ISSN: 0525-1931
DOI: 10.2116/bunsekikagaku.6.215