Polarographic Determination of Cuprous Ion in Copper Sulfate Solution
نویسندگان
چکیده
منابع مشابه
Determination of Copper (II) and Palladium (II) by Polarographic Methods
Schiff base 2–Hydroxy–5–methoxy Benzaldehyde – Tris [HMBT] Ligand is a new chromogenic reagent have not been used so far for the determination of copper and palladium in trace quantities. Effect of p H on wave height for COPPER[HMBT] PALLADIUM –[HMBT] systems have been studied at p H 7-8.5 and 8.5-11.5 for Copper and Palladium respectively in 0.1 m molar NaNo3 and 0.002 % Triton –x–100 which in...
متن کاملPolarographic determination of malononitrile.
A procedure is proposed for the determination of malononitrile by differential pulse polarography in methanolic 0.1M tetraethylammonium iodide/0.001M tetramethylammonium hydroxide as the supporting electrolyte. In this medium malononitrile is chemically converted into an electroactive species. With close control of timing of the steps in the procedure the error of the method is +/-1.5% in the c...
متن کاملThe polarographic determination of selenium in urine.
Polarographicdata are presented for the reduction of selenite ion in 3M sulfuric acid, 1M potassium chloride, and 1M ammonia-ammonium chloride. In these first two media two waves are obtained correspondingto the diffusion-controlled reduction of selenite ion to selenium amalgam and the adsorption of selenite ion on the mercury drop, respectively. One wave is obtained in ammonia-ammonium chlorid...
متن کاملVoltammetric Determination of Copper Ion in Water Samples Using a Drop Casted Biopolymer
Poly-dopamine, inspired by biopolymers of mussels, is an adhesive catecholamine possessing low cytotoxicity and very good biocompatibility. In the present study, poly-dopamine nanoparticles (PDNP), as a biopolymer, were synthesized and characterized using FTIR spectroscopy, scanning electron microscopy and electrochemical methods. The drop casted PDNPs at the surface of carbon paste electrode (...
متن کاملPreparation of 3D nanoporous copper-supported cuprous oxide for high-performance lithium ion battery anodes.
Three-dimensional (3D) nanoporous architectures can provide efficient and rapid pathways for Li-ion and electron transport as well as short solid-state diffusion lengths in lithium ion batteries (LIBs). In this work, 3D nanoporous copper-supported cuprous oxide was successfully fabricated by low-cost selective etching of an electron-beam melted Cu(50)Al(50) alloy and subsequent in situ thermal ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Journal of the Society of Chemical Industry, Japan
سال: 1957
ISSN: 0023-2734,2185-0860
DOI: 10.1246/nikkashi1898.60.692