Polarization Maintaining Photonic Crystal Fiber
نویسندگان
چکیده
منابع مشابه
Novel fiber optic polarimetric torsion sensor based on polarization-maintaining photonic crystal fiber [7004-158]
We proposed and demonstrated the application of a polarization-maintaining photonic crystal fiber for torsion sensing. The sensor has high twist angle resolution and exhibits reduced temperature sensitivity, making it an ideal candidate for torsion sensing.
متن کاملFiber optic pressure sensor based on polarization-maintaining photonic crystal fiber for downhole application
We experimentally demonstrate a high pressure sensor based on a polarization-maintaining photonic crystal fiber (PMPCF) with Sagnac loop configuration for downhole application. The pressure sensitivity of the proposed sensor is 4.21 nm/MPa and 3.27 nm/MPa at ~1320 nm and ~1550 nm respectively. High pressure measurement up to 20 MPa has been achieved in our experiment. The sensor also shows redu...
متن کاملThermally Optimized Polarization-Maintaining Photonic Crystal Fiber and Its FOG Application
In this paper, we propose a small-diameter polarization-maintaining solid-core photonic crystal fiber. The coating diameter, cladding diameter and other key parameters relating to the thermal properties were studied. Based on the optimized parameters, a fiber with a Shupe constant 15% lower than commercial photonic crystal fibers (PCFs) was fabricated, and the transmission loss was lower than 2...
متن کاملPolarization-maintaining photonic-crystal-fiber-based all-optical polarimetric torsion sensor
An application of a polarization-maintaining photonic crystal fiber (PM-PCF) for torsion sensing is proposed and experimentally demonstrated. The response of the sensor is theoretically validated using the Jones matrix. High normalized sensitivity of ∼0:014=° was measured within a linear twist angle range from 30° to 70°. The sensor response was observed to be highly repeatable over a 90° twist...
متن کاملPolarization Maintaining Highly Birefringent Small Mode Area Photonic Crystal Fiber at Telecommunication Window
In this paper a highly polarization maintaining birefringent photonic crystal fiber at telecommunication window is reported via Full-Vectorial Finite Element Method (FV-FEM). By taking triangular lattice of three ring hexagonal structure PCF with suitable designing parameters such as symmetrical elliptical hole along radial axis of ellipticity a/b=5μm, air hole diameter d=1μm and pitch Λ=2.3μm,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Review of Laser Engineering
سال: 2006
ISSN: 0387-0200,1349-6603
DOI: 10.2184/lsj.34.1_22