Pneumatic Control Design

Control System Design of a Pneumatic Servo System

Pneumatic servo systems are applied in several industrial applications and have also been studied extensively for the purposes of compensating the nonlinearity of pneumatic servo systems and improving the controllability with robust control. In their control system design, the transfer function of a pneumatic servo system has been a third-order time lag system, based on the assumption that serv...

Pneumatic Conveying Design Guide

Design of Pneumatic Diffuser System

During non-generation periods, leakage through the wicket gates of a hydroturbine often results in very poor quality water (low or zero dissolved oxygen) in the tailrace of the hydropower facility. Generally, the leakage rate is relatively small, usually about 5-10 cfs per turbine. A bottom-mounted diffuser system was designed based on laboratory-measured and manufacturer-supplied specification...

Multiplex Pneumatic Control Method For

2 Abstract Pneumatic actuators have several advantages such as light weight, safety, low cost and high compliance. However, many pneumatic actuators have complicated systems that include a compressor, air tubes, and pneumatic valves with electrical wires. This research proposes a new control method for a multiplex pneumatic transmission constructed with special resonant valves and air tubes wit...

Design and Fabrication of Pneumatic Robotic Arm

This project aims to Design and fabricate pneumatic arm for pick and place of cylindrical objects. The handling of materials and mechanisms to pick and place of objects from lower plane to higher plane and are widely found in factories and industrial manufacturing. There are number of pneumatic arms are available which consists of so many mechanisms hence becomes expensive. The designed pneumat...