PML BASED DESIGN OF STEEL BUILDINGS USING 3D ELASTO-PLASTIC DYNAMIC ANALYSES
نویسندگان
چکیده
منابع مشابه
Performance-based Seismic Design of 3d R/c Buildings Using Inelastic Static and Dynamic Analysis Procedures
A performance-based design procedure for realistic 3D reinforced concrete (R/C) buildings is presented, that involves the use of advanced analytical tools. Depending on the building configuration, use of two alternative tools is suggested, i.e. either time-history analysis for appropriately scaled input motions, or inelastic static (pushover) analysis, both for two different levels of earthquak...
متن کاملmetrics for the detection of changed buildings in 3d old vector maps using als data (case study: isfahan city)
هدف از این تحقیق، ارزیابی و بهبود متریک های موجود جهت تایید صحت نقشه های قدیمی سه بعدی برداری با استفاده از ابر نقطه حاصل از لیزر اسکن جدید شهر اصفهان می باشد . بنابراین ابر نقطه حاصل از لیزر اسکنر با چگالی حدودا سه نقطه در هر متر مربع جهت شناسایی عوارض تغییر کرده در نقشه های قدیمی سه بعدی استفاده شده است. تمرکز ما در این تحقیق بر روی ساختمان به عنوان یکی از اصلی ترین عارضه های شهری می باشد. من...
Simulation of Dynamic Behavior of Seismic Isolators Using a Parallel Elasto-Plastic Model
Abstract—In this paper, a one-dimensional (1d) Parallel ElastoPlastic Model (PEPM), able to simulate the uniaxial dynamic behavior of seismic isolators having a continuously decreasing tangent stiffness with increasing displacement, is presented. The parallel modeling concept is applied to discretize the continuously decreasing tangent stiffness function, thus allowing to simulate the dynamic b...
متن کاملA 3D elasto-plastic FEM program developed for reservoir Geomechanics simulations: Introduction and case studies
The development of yielded or failure zone due to an engineering construction is a subject of study in different disciplines. In Petroleum engineering, depletion from and injection of gas into a porous rock can cause development of a yield zone around the reservoir. Studying this phenomenon requires elasto-plastic analysis of geomaterial, in this case the porous rocks. In this study, which is a...
متن کاملPerformance-Based Plastic Design of Moment Frame-Steel Plate Shear Wall as a Dual System
Steel Plate Shear Wall (SPSW) is an emerging seismic load-resistant system that, compared to other systems, enjoys the advantages of stable ductile behavior, fewer detailing requirements, rapid constructability, and economy. American seismic provisions decree that a SPSW should be designed as a moment frame with a web infill plate. Specifically, in case of buildings taller than 160 ft, it decre...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: AIJ Journal of Technology and Design
سال: 2013
ISSN: 1341-9463,1881-8188
DOI: 10.3130/aijt.19.843