PM-Assisted Synchronous Reluctance Machine Flux Weakening Control for EV and HEV Applications
نویسندگان
چکیده
منابع مشابه
Predictive torque and flux control for the synchronous reluctance machine
This paper presents a predictive torque and flux control algorithm for the synchronous reluctance machine. The algorithm performs a voltage space phasor pre-selection, followed by the computation of the switching instants for the optimum switching space phasors, with the advantages of inherently constant switching frequency and time equidistant implementation on a DSP based system. The criteria...
متن کاملDesign and Performance Evaluation of a Medium Power Pm-assisted Reluctance Synchronous Traction Machine Using Bonded Pm-sheets
This paper describes the optimum design of a permanent-magnet-assisted reluctance rotor of a 110 kW reluctance synchronous traction machine. Previous studies show that the performance of the pure reluctance synchronous machine drive deteriorates fast in the flux-weakening speed region. To address this problem, thin bonded permanent-magnet sheet material is used inside the flux barriers of the r...
متن کامل“J-Series” IPM and T-PM for EV and HEV Applications
1. Introduction There is a growing demand for power semiconductors applied to motor drive inverters for electric vehicles (EVs) and hybrid electric vehicles (HEVs). Based on the results of the development and mass production of automotive power semiconductors, which require very high reliability and functionality, Mitsubishi Electric has developed the J-Series Intelligent Power Modules (IPMs) a...
متن کاملTraction Permanent Magnet Synchronous Motor Torque Control with Flux Weakening
The paper deals with analysis of dynamic behavior of a feedback flux weakening control of PMSM traction drive for light vehicles. The PMSM flux weakening is very important for traction drives. Two torque control structures were analyzed pure feedback control and feedback control with prediction of the field producing current component. The principles, control structures, simulation and experime...
متن کاملPerformance Comparison of Conventional Synchronous Reluctance Machines and PM-Assisted Types with Combined Star–Delta Winding
This paper compares four prototype Synchronous Reluctance Motors (SynRMs) having an identical geometry of iron lamination stacks in the stator and rotor. Two different stator winding layouts are employed: a conventional three-phase star connection and a combined star–delta winding. In addition, two rotors are considered: a conventional rotor without magnets and a rotor with ferrite magnets. The...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Industrial Electronics
سال: 2018
ISSN: 0278-0046,1557-9948
DOI: 10.1109/tie.2017.2748047