Plug Production for Thermoforming using Fused Deposition Modelling
نویسندگان
چکیده
منابع مشابه
Testing of Materials for Rapid Prototyping Fused Deposition Modelling Technology
Paper presents knowledge about types of test in area of materials properties of selected methods of rapid prototyping technologies. In today used rapid prototyping technologies for production of models and final parts are used materials in initial state as solid, liquid or powder material structure. In solid state are used various forms such as pellets, wire or laminates. Basic range materials ...
متن کاملFilaments Production and Fused Deposition Modelling of ABS/Carbon Nanotubes Composites
Composite acrylonitrile-butadiene-styrene (ABS)/carbon nanotubes (CNT) filaments at 1, 2, 4, 6 and 8 wt %, suitable for fused deposition modelling (FDM) were obtained by using a completely solvent-free process based on direct melt compounding and extrusion. The optimal CNT content in the filaments for FDM was found to be 6 wt %; for this composite, a detailed investigation of the thermal, mecha...
متن کاملPlastics Thermoforming Tool Design: Plug Vs Cavity Molds
One of the most fundamental decisions when designing a mold for the plastics thermoforming process is whether to use a plug (male) mold or a cavity (female) mold design. This critical decision is often brushed over in the literature yet has the greatest single impact on part wall thickness and wall thickness variation. Other considerations when deciding on this fundamental design concept includ...
متن کاملA parametric study of part distortions in fused deposition modelling using three-dimensional finite element analysis
A finite element analysis (FEA) model was previously developed by the current authors to simulate the fused deposition modelling (FDM) process. The model considered coupled thermal and mechanical phenomena and incorporated an element activation function to mimic the additive nature of FDM. Due to repetitive heating and cooling in the FDM process, residual stresses accumulate in a part during de...
متن کاملOptimization of Fused Deposition Modelling (FDM) Process Parameters Using Bacterial Foraging Technique
Fused deposition modelling (FDM) is a fast growing rapid prototyping (RP) technology due to its ability to build functional parts having complex geometrical shapes in reasonable build time. The dimensional accuracy, surface roughness, mechanical strength and above all functionality of built parts are dependent on many process variables and their settings. In this study, five important process p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Polytechnic
سال: 2020
ISSN: 1302-0900
DOI: 10.2339/politeknik.789686