Plastic rotation capacity of high-strength concrete beams
نویسندگان
چکیده
منابع مشابه
plastic hinge rotation capacity of reinforced concrete beams
a parametric study is performed to assess the influence of the tension reinforcement index, ( ω = ρ fy /f bc), and the bending moment distribution (loading type) on the ultimate deformation characteristics of reinforced concrete (rc) beams. the analytical results for 15 simply supported beams with different amounts of tension reinforcement ratio under three different loading conditions are pres...
متن کاملFlexural Testing of High Strength Reinforced Concrete Beams Strengthened with CFRP Sheets
The objective of this study is to investigate the effectiveness of externally bonded CFRP sheets to increase the flexural strength of reinforced high strength concrete (HSC) beams. Four-point bending flexural tests to complete failure on six concrete beams, strengthened with different layouts of CFRP sheets were conducted. Three-dimensional nonlinear finite element (FE) models were adopted by A...
متن کاملANN BASED MODELING FOR HIGH STRENGTH CONCRETE BEAMS WITH SURFACE MOUNTED FRP LAMINATES
This study focuses on using an artificial neural network (ANN) based model for predicting the performance of high strength concrete (HSC) beams strengthened with surface mounted FRP laminates. Eight input parameters such as geometrical properties of the beam and mechanical properties of FRP laminates were considered for this study. Back propagation network with Lavenberg-Marquardt algorithm has...
متن کاملPerformance of High-strength Concrete
This research was undertaken to investigate performance of high-strength concrete incorporating mineral admixtures, fly ash and silica fume. For modern construction, the use of new construction materials is increasing to achieve economy and improved final results. An extensive literature search was carried out to review various engineering properties of high-strength concrete. In this study, th...
متن کاملShrinkage of High Strength Concrete
This paper presents the results of an experimental investigation carried out to evaluate the shrinkage of High Strength Concrete. High Strength Concrete is made by partially replacement of cement by flyash and silica fume. The shrinkage of High Strength Concrete has been studied using the different types of coarse and fine aggregates i.e. Sandstone and Granite of 12.5 mm size and Yamuna and Bad...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials and Structures
سال: 2003
ISSN: 1359-5997,1871-6873
DOI: 10.1007/bf02481567