Plastic deformation-induced improved mechanical and thermal properties in hot-forged SiC-TiC composite

Mechanical alloying of Cu and Fe induced by severe plastic deformation of a Cu-Fe composite

A filamentary composite elaborated by cold drawing was processed by High Pressure Torsion (HPT). The nanostructure resulting from this severe plastic deformation (SPD) was investigated thanks to scanning electron microscopy, transmission electron microscopy, X-ray diffraction and 3D atom probe. Although the mutual solubility of Cu and Fe is extremely low at room temperature in equilibrium condi...

Thermal processing induced plastic deformation in GaAs wafers

Different types of dislocation bundles were identified in the (001) GaAs substrates of III–V heterostructures. Comparisons of scanning infrared polariscopy images and X-ray transmission topograms showed a one to one correlation of stripes of reduced residual shear strain and dislocation bundles of the majority type. Visible-light interferometry and Makyoh topography, on the other hand, showed a...

MICROSTRUCTURE AND MECHANICAL PROPERTIES OF THE ULTRAFINE-GRAINED COPPER TUBE PRODUCED BY SEVERE PLASTIC DEFORMATION

In this paper, cyclic flaring and sinking (CFS) as a new severe plastic deformation (SPD) method was employed to produce the ultrafine grain (UFG) copper tubes. The extra friction has eliminated in the CFS method that provided the possibility for production of longer UFG tubes compared to the other SPD methods. This process was done periodically to apply more strain and consequently finer grain...

Mechanical Properties of Copper Processed by Severe Plastic Deformation

THE EFFECT OF SEVERE PLASTIC DEFORMATION ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AS-CAST AZ31

The evolution of microstructure and mechanical properties of a magnesium cast alloy (AZ31) processed by equal channel angular pressing (ECAP) at two different temperatures were investigated. The as-cast alloy with an average grain size of 360  was significantly refined to about 5  after four ECAP passes at 543 K. Grain refinement was achieved through dynamic recrystallization (DRX) du...