Plasmolysis of methane using a high-frequency plasma torch
نویسندگان
چکیده
The possibility of converting methane into hydrogen using a high-frequency induction plasma torch at the atmospheric pressure has been experimentally studied. dependencies degree conversion and rate production were studied depending on process conditions. It demonstrated that methane-to-hydrogen can reach values close to 100%. Keywords: plasmolysis, HF torch, hydrogen.
منابع مشابه
Dry Reforming of Methane Using Cold Plasma; Kinetic Model Study
In this work, the dry reforming of methane was studied using a corona and gliding discharge plasma microreactors. A chemical kinetic model was developed to describe the experimental behavior observed. The kinetic model is proposed based on the assumption that the reactant molecules CH4 or CO2 are attacked by active species produced b...
متن کاملSynthesis of ferrite and nickel ferrite nanoparticles using radio-frequency thermal plasma torch
Nanocrystalline ~NC! ferrite powders have been synthesized using a 50 kW–3 MHz rf thermal plasma torch for high-frequency soft magnet applications. A mixed powder of Ni and Fe (Ni:Fe 51:2), a NiFe permalloy powder with additional Fe powder (Ni:Fe51:2), and a NiFe permalloy powder (Ni:Fe51:1) were used as precursors for synthesis. Airflow into the reactor chamber was the source of oxygen for oxi...
متن کاملDielectric Strontium Zirconate Sprayed by a Plasma Torch
Amultifunctional material, strontium zirconate, SrZrO3, studied in literatures as a dielectric ceramics, thermal barrier coating, proton-conductor, and luminescent material was sprayed by a water-stabilized plasma torch WSP 500. Stainless steel and plain carbon steel were used as substrates. Coatings with thickness of 1 to 2 mm were produced, whereas the substrates were preheated over 450 °C. T...
متن کامل1 Arc Plasma Torch Modeling
Arc plasma torches are the primary components of various industrial thermal plasma processes involving plasma spraying, metal cutting and welding, thermal plasma CVD, metal melting and remelting, waste treatment and gas production. They are relatively simple devices whose operation implies intricate thermal, chemical, electrical, and fluid dynamics phenomena. Modeling may be used as a means to ...
متن کاملDesign of a High Temperature Chamber Fed by a Plasma Torch for Thermal Removal of Tars
Biomass is one of the most important sources of renewable energy. One aim of Biomass gasification is to convert a solid feedstock into a valuable syngas for electricity or liquid fuel production. Actual industrial auto-thermal gasification processes achieve a production of syngas mainly polluted by products such as dust, nitrogen oxides, sulfur dioxide and tars. Tars remain, one of the main dra...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Pis?ma v Žurnal tehni?eskoj fiziki
سال: 2022
ISSN: ['1726-7471', '0320-0116']
DOI: https://doi.org/10.21883/tpl.2022.12.54942.19383