Plasma spraying powder.

Feasibility of Plasma Spraying in Developing MMC Coatings: Modeling the Heating of Coated Powder Particles

Coated powder particles composed of a ceramic core and a metallic coating are being considered for plasma spray applications. The goal of using these powders is to produce particulate-reinforced metal-matrix composite coatings. In this work, the feasibility of plasma spray processing in producing these composite coatings is evaluated. A numerical model is presented to analyze the in-flight ther...

Plasma spraying and characterization of chromium carbide – nickel chromium coatings

Chromium carbide – nickel chromium powder Cr3C2-25wt.NiCr was plasma sprayed by a water-stabilized system WSP®. A series of experiments with variable feeding distance was carried out. Basic characterization of coatings was done by XRD, SEM and light microscopy plus image analysis. Microhardness was measured on polished cross sections. The main focus of investigation was on resistances against w...

Solution and Suspension Plasma Spraying of Nanostructure Coatings

Air-plasma spraying colloidal solutions of nanosized ceramic powders

Coatings prepared from nanosized powders were obtained by spraying ethanol-based colloidal solutions into a plasma plume. The powders investigated included 40 nm γ -Al2O3, 75 nm 8 wt% Y2O3-ZrO2, and 750 nm 25 wt% CeO2-ZrO2. Spray distances from approximately 50 to 63 mm were required to achieve significant coating deposition. As observed in the TEM, the typical lamella morphology of air plasma ...

Plasma lignocaine concentrations following endotracheal spraying with an aerosol.

Plasma concentrations of lignocaine were measured in three groups of anaesthetized patients following spraying of the trachea and larynx with a lignocaine 10% aerosol spray. Greater venous plasma concentrations occurred in patients who were paralysed with suxamethonium. A mean plasma concentration of 0.1 mug/ml of lignocaine resulted from each 10 mg of lignocaine used in spontaneously breathing...