Plasma Sprayed Resistors

Dielectric Strontium Zirconate Sprayed by a Plasma Torch

Amultifunctional material, strontium zirconate, SrZrO3, studied in literatures as a dielectric ceramics, thermal barrier coating, proton-conductor, and luminescent material was sprayed by a water-stabilized plasma torch WSP 500. Stainless steel and plain carbon steel were used as substrates. Coatings with thickness of 1 to 2 mm were produced, whereas the substrates were preheated over 450 °C. T...

Dielectric properties of plasma sprayed silicates subjected to additional annealing

Several silicate materials were plasma sprayed and characterized by the authors in recent years from the point of view of their chemical and phase compositions, microstructure and mechanical as well as thermal properties. Present work is concerned with selected dielectric properties of these deposits. Synthetic mullite and steatite as well as natural olivine-forsterite were plasma sprayed using...

Suspension Plasma Sprayed Titanium Oxide and Hydroxyapatite Coatings

The paper aims at development of TiO2, Ca5(PO4)3OH (hydroxyapatite, HA) and their multilayer coatings onto stainless steel, titanium and aluminum substrate using suspension plasma spraying. The total thickness of the coatings was in the range 10 to 150 μm. The suspension on the base of distilled water, ethanol and their mixtures was formulated with the use of fine commercial TiO2 pigment crysta...

High-temperature degradation of plasma sprayed thermal barrier coating systems

Thermal barrier coating systems (TBCs) are used in gas turbines to prevent high-temperature degradation of metallic materials in the combustor and turbine. One of the main concerns regarding TBCs is poor reliability, and accurate life prediction models are necessary in order to fully utilise the beneficial effects of TBCs. This research project aims at developing deeper understanding of the deg...

Spectroscopic and Dielectric Characterization of Plasma Sprayed Titanates